At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Dear Sirs,
I hope you can assist me. The plastic cap/pour spout to my 32 oz. Dura Bottle fell on the floor and broke, so now I need a replacement cap. Can I please purchase a replacement cap from you, or can you please let me know who I need to contact to purchase the cap? thank you,
Nancy Powell
5712 172nd Pl. SW
Lynnwood, WA 98037
USA
Ph. # 425-745-0864
[email protected]
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
I don't know where the washer bottle is on this model, friend, but the modern trend is to fit them low down with an extended spout especially if it is a large capacity bottle. They are often fitted in the space under the forward part of the front wing, mudguard or fender and following the direction of the filler spout should give a strong clue to the location. Access usually means moving plastic parts out of the way; such as the wing liner and any undertray or parts of an undertray.
Especially in winter when plastic is very difficult to work with it is better to completely remove any plastic parts but be aware some or all of any plastic retainers are likely to break during removal. Better access to the wing liner would be achieved by raising the car taking proper safety precautions and removing the front wheel.
Look for a plastic cap with two bumps on it near the bottom of the engine (or a pipe about 4" long with a pipe cap on the end). Open the cap and tip the machine to drain the oil. Set the blower upright and refill with 3/4 quart of oil (24 oz). Check level, add more until the dipstick says it is correct. Usually about 32 oz.
The tank is labeled. Take the clean/solution tank off the vacuum by lifting it straight up. Unscrew the black cap on the bottom of the tank and remove the bottle insert. Add 8 oz of the Little Green formula (this gets you up to the Formula fill line). Then add hot water to the water fill line. Replace the bottle insert and tighten the black cap. Then replace the clean/solution tank by lining the indentations up with the vertical guides on the left side of the unit and sliding it straight down. Please note that the bottles of the formula come in 32 oz or 64 oz bottles. So you can expect one of the smaller bottles to last 4 fill cycles.
Removes soap scum, scale, hard water deposits and body oils
Safe on plexiglass, plastic fiberglass, chrome, brass, gold, silver and ceramic
It is carried by Ace Hardware $6.49 ea
An awesome product that you spray on and let sit overnight. then simply wash it off. (Non Toxic / Non corrosive) No gloves required but does have an odd odor so I would let it soak outside. Heavy accumulations may require a second treatment.
Also great on shower heads. Remove it.. place it in a glass overnight and then re-install the next moring. Does not discolor anything. Ditto for shower enclosures and tile. Why this product is not in great demand is a mystery.
The "Inline Spout Connector" is used to control the engine timing by dis-connecting the timing control from the timing control unit, and you must remove the inline spout connector before you can change or set the ignition timing, and if the inline spout connector is missing, then the engine timing will not be controlled by the dura-spark control unit, the check engine light should be on, and the engine will perform poorly. Usually it is located out by the distributor or over by the dura spark control unit.
It is normally a small squared looking grey plastic thing that should be in the end of a wire connector, and that is the only thing that will on the end of that wire connector, and it is basically just a jumper plug. Here is a similar image of what you should be looking for.
Do they come in a bottle with a spout on it? Twist off the spout and pour, if the tip is sealed, you'll have to snip it off, maybe sealed under the cap too. Check it out.
take the top cover off the unit(after UNPLUGGING unit of course)screw location varies on units,some you need to remove front cover first to access screws for top
Go to your local Pet Store! They have a remover called "Simple Solution." I have used it a lot!! It works for about every stain there is!! It's about $8 for a 32 oz. bottle. Worth every penny! I use it on my carpet...just pour some on like you were pouring a glass of water on it...let it set for a little bit..viola! Hope it works! It does for me!!
×