Wooden train set track, pegs missing! Where would I be able to buy some spares, please? It's for Brio compatible track, but not sure who it's made by... Help! This is driving us crazy!

Currently, I can suggest only you contact peg-perego's uk representative Mamas & Papas at the address given on the following webpage
http://global.pegperego.com/toys-site/where-to-buy/
[

MAMAS & PAPAS LTD.

Colne Bridge Road
HD5 ORH HUDDERSFIELD WEST YORKSHIRE - UNITED KINGDOM
Phone: (44) 1484-438200
Fax : 1484-438210
Email: [email protected]
]

If they have anything you would like, I believe that delivery can be arranged, and you will not have to go to Huddersfield.

(http://global.pegperego.com site > support tells you how to contact UK rep.)

I suspect that track for the choo-choo model is compatible with what you are looking for (but that doesn't seem to be available at present either. You might try ebay, but be careful to check that you are buying exactly what you need.

21.July.2014

Here's the link to BRIO Customer Service, contact them for instructions.
Customer service BRIO

Can someone please update this answer with functional links to the Brio Play table assembly instructions and/or please provide the table bolt specifications here? Thank you.

are you looking for the manual for the track setup or the train setup?

See my comment in this answer: Changed batteries in Brio train mighty red locomotive and still does not...

Look in to the funnel. Unscrew and the front comes off and then replace it...

I dont know where you can get replacement tyres. But here is a fix for the problem:
Using tweezers then fingers, pull off the existing tyres.
Take ordinary sewing thread, and wrap it around the V in the wheels (where the tyre was), about 20 turns or so, keeping the ends inside the V.
Put the tyres back on.
The thread forces the tyres further out, making some tread from the rubber available above the level of the plastic wheel rims.

use this as a reference
http://us.pegperego.com/toys-catalog/2011/Figure+8+Conversion+Track+Set

Click on this link below and contact Brio for a replacement remote control to your express train

http://brio.knex.com/AboutBrio/Contact_Information.php

Look for and remove little cross headed (not triangular) screw.