It says out of range and i cant get any thing else

If you cant get the genuine switch, there may be an after market or generic switch which does the same thing. Try looking on the internet for oven control switches or thermostats.

1st thing , unplug it wait a few minutes then reconnect it

2nd thing feel with your finger the tactile buttons on back for any of them that feel depressed or farther in than others , this is most likely your stuck key

Try to unplug the stove and let it sit for a few minutes as it might reset it again plug it back in and try again if not ask a tech from the dealer

Thanks for your inquiry, Harold Goodman!

I see that you replaced the front panel on your Frigidaire range, FGES3065KFG, and now the controls are not working. Sounds like it could be a possible problem within your EOC (Electronic Oven Control) or UIB (User Interface Board) I would seek assistance from a professional to come out and properly diagnose your range. This can help avoid any unnecessary part purchases. -Matt

Sadia can you please please email me to let me now how the oven works because I have the same problem

Hi,

Seems like you found out the hard way what I wrote about in this tip...

Check it out it also contains some thing to try on how to unlock that oven..

Self Cleaning Oven Problem

heatman101

Asker's Testimonial " Wish I had read this first. I never would have used the self cleaning option. Thanks for the info!! " - amymrocks

one of 2 things:first check for 120/240volts atmain panel in your house,then same at unit, then look at your element for a hot spot it will be pitted and discolored there and ready to break,so the current the element cant get thru entire circuit

For the second problem, can you get the white writing before Windows kicks in? If so, you will have to hit F8 and start Windows in VGA mode so you can see it. Then you can adjust the graphic display. It could very well be your graphics card is displaying something out of your monitor's range.

the best way is to get a gas fitter to check the millibars coming through the pipe. it should be 20 miliibars at the meter or more and not less than 19millibars at the cooker. if its less it needs bigger pipe. simple test to do. if its wrong at the meter the gas supplier must turn it up.

cant nfind euf5 code can find eo f5 its a door loc code saing the door and latch switches do not agree try pushing stop/cancel and try again also does the oven light go off and on when you open and close the door