I lost one of my speaker cords for my BOSTORN MICROMEDIA SYSTEM.The system has bass floor subwoffer, and two 3" X 3" soeajers,\r\nThe serial number iw EJ0102668 on the subwoofer,and the part# is 7000596, if that helps. Is it possible to find these cords anymore? Thanks Don 505-692-3142

Unfortunately,the audio cable for your Bose 15 system is specially designed for use only with that Subwoofer,it cannot be used with a different model or brand of subwoofer

They usually use pretty standard audio cords, you can probably just get a replacement at your local Radio Shack. The only one I would be worried about is if you lost the power cord....if that's the case you need to be sure if you buy a different one that the voltage is the same as required.

Hi,

Yes you can use any 2-core cable to carry the bass signal to the subwoofer. As the bass speaker cone is the largest cone in your speaker set I would recommend a good quality cable of decent gauge (thickness) to carry the bass signal.

You just need to make sure you have the right connectors for the amp and sub and make sure you connect positive to positive and negative to negative.

Hope this helps,

Chris

try universal power plug sold at any CVS or Wallgreen start from lowest voltage and go up till it works make sure the plug matches and polarity

There is a bass adjustment knob on the acoustimass module(subwoffer). That is the only adjustment I am aware of at this time.

have you tried ebay?

Well first off if there is a power cord that goes in the front then it should be powered by that. Second of all you should have a power switch on the front of the speakers to turn it on and volume control.

Hi...
On some stereo gear the headphone jack interrupts the speaker connection when the headphones are in. you "might" have something broken in the headphone jack which is keeping the speakers from turning on.
Is there a MUTE switch on the unit?
Or an "External speaker off" thingy in the menu?

> check it in another computer
> if problems persist check setting of speaker also connectivity

pls sent be clear pics of ur spks with all wires u r having