I have a Regalware 55 cup coffee urn model #K1355. I do not have a parts list for it. The part I'm looking for is a small Switch. It say's W-R on it which means White Rodgers. The numbers on the switch are 161491 085N, other numbers on it are , 250C, 158E and Tf318C. Can you help me find switch or get me a parts list so i can get part number. Thanks.

Go to Goodmens.com. Farberweare parts. Good luck. Ron

Look for the model number on the back or bottom of your coffee urn. With the model number you may be able to order replacement parts online from the following supplier:

http://www.partsourceplus.com/farberware-parts-accessories-coffee-makers-c-61_171_884_906.html

If you part is not listed I would recommend contacting this supplier through their web inquiry form to see if an alternate part can be recommended:

http://www.partsourceplus.com/contact_us.php

Your model sounds like the West Bend 59055 - Large Coffee Urn, 60 Cup.
The User Manual for your coffer urn can be found here:

http://www.westbend.com/supportdata/L5613B_LargeCapacityUrns-All.pdf

Instruction for making coffee can be found on page 5. For 55 cups is would take 3 1/4 cups of coffee.

Use an electric perc or regular grind coffee; if you grind your own this should be a medium to coarse grind.

Do not use 'drip' or finely ground coffee as this could plug the drain holes in the basket and cause the urn to flood.

I have a Regalware 55 cup coffee urn, model #K1355. I do not have a part's list for unit. The part I'm looking for is a small switch. It says WR-I think that stands for White Rodgers. It's a four terminal switch two terminals on each side. The numbers on switch are161491 085n, other numbers on switch are250c, 158E,andTf318c. can you help me find this switch.

Hi 2 scoops of coffee to 3 cups not mugs. Then take it from there, adjust to your liking. Ron

use 7- 8 0z cups fresh grounds. Time to brew depends on efficiency of urn. Maybe 15-20 minutes on average.

I called Farberware directly and they do not make this coffee urn any longer and no longer stock the part. They do however stock parts for a 36 cup urn that they said had the same size stem pump on the end. The difference was in the length. I ordered 2 of these and plan on using 1 to lengthen the other one to the correct length. My son is a welder and believes he can do this for me. We will see what happens.

Hi. Go to repairshack.con. Good luck. bobbyone

Hi. Go to repairshack.con for parts. bobbyone

A replacement faucet kit is available from the manufacturer here:

http://www.focuselectrics.com/catalog.cfm?dest=itempg&itemid=1044&secid=54&linkon=category&linkid=58

This is for a model 58036 36-cup urn. You don't give the model number of your urn, and a 25-cup model isn't listed. You can go back a page to the model selection and choose your model from the list. But I've found most of their urns use the same faucet.