Black (no colour) printing setting Ebson Stylus CX4800

After pressing print, when you're on the print page, click "Printer Settings." You should have some color settings, one of them being black and white.

Some printers won't print unless both cartridges are present.
Find your manual here if you need to.
Good luck

I have a CX4800 and after clicking Print, I click Properties, then check Black ink only (is this how you are printing black and white - or is your document black and white)
If you haven't tried this option - it is worth a shot.

Because the printer need all cartridges not empty to initialized and printing, scanning or copying.Just replace the empty ink.

WHen your p;;rinter name comes up, check the printing p;references. You have "P:rint colors as black & white" checked. Un check it. It is in the printer dialog box, not PSP.

-use printer head cleaning utility
-change cart

Hi!

I'm afraid that most printers nowadays simply refuse to print unless you have ink in BOTH cartridges. No workaround. At least with an
Epson you have the possiblily of buying much less expensive generic refills...If you do this always try and find reviews of the brand of refills...caveat emptor! (buyer beware)

Sorry..

check whether there is an alignment adjustment in the printer driver, the lines may simply be one nozzle out of alignment., or the connector between the print carriage and cartridge may be dirty, causing that one nozzle to misfire

not a guarantee, just something to check

the only way i got mine printing was to replace the colour ink! sorry

When in page set up or similar you should see an black only option.-or see your on disk manual This will serve fortext- However if graphics are Incorporated all colours are printed to obtain a black