What do you do if you lose the directions? - Scientific Explorer Ultimate Crystal Growing Kids Scientific Explorer Kit

We aren't Timex, we are Fixya. Contact them direct. Make sure you are using the right compound of battery, not just the right size.

https://www.google.com/search?q=Timex+Expedition+watch+that+keeps+losing+time

https://www.fixya.com/support/r27181038-changing_watch_batteries

..

check that the rings were installed correctly as they can only be fitted in one direction otherwise excessive oil consumption will result. Check float level or fuel settings for the slow acceleration on slope power problems .

Your trans is likely a 4L80-E and the 3rd (direct) clutches have failed. When you lose overdrive, you may also be losing 3rd, but the clincher to my diagnosis is your reverse problem. 3rd, overdrive, and reverse all utilize the direct clutches. My experience has shown me time and again, that usually as part of the overhaul, the direct drum and center support need replacing.

Fiend your solution direct from nintendo. Here is your solution....
http://www.nintendo.com/wiiconsole/prob676ijt65/solution


asaybosi3

please reset the router
configure the router type ip address on the browser
may be 192.168.1.1

yes you can replace the lever.remove the plastic covering and look youll see how it on there.

check the continuity of the AV Cables and check for any loose connection/dry solder in the connectors

Vizio representative suggested connecting antenna directly to TV and not through the VCR. In doing this, we lose the ability to record on the VCR but we record elsewhere and watch downstairs. The problem is solved on losing channels. I must add that we watch and record on a Sharp digital TV upstairs and do not lose channels. I don't know why the VCR had this effect on this Vizio TV.

When you say you "lose" channels, you probably mean there's no signal there anymore but they are still in the channel memory. This is normal if you have a rotatable antenna. You need to mark the rotator (or just keep a chart nearby) with the heading for each channel.

If you mean you're losing channels from memory when rescanning after turning the antenna, the only solution I can offer is to record the channels found (and their signal levels) after scanning a direction. Then change directions and rescan. See what new channels have been found, what have been lost, or how signal level has changed on common channels. Then you can manually add whatever you need, and you'll know what direction is best for each. It's tedious, but you should only need to do it once.

Indeed, losing directions can be quite frustrating. Below, I did some research and found a website which has most Bissell Vacuum cleaner manuals and directions online

http://homeappliance.manualsonline.com/manuals/mfg/bissell/bissell_product_list.html?s=gg314159

Hope this helps.
FerrariXP