Change user When I call someone the name that appears on their phone is still the name of the previous person that worked this desk. How do I change the name. I have changed my greeting.

1.click start menu 2.click control panel 3.click user account 4.click the formal owner username 5. you will see various options one of which is change username, then click 6.enter your desired username and click ok

Intercom #409 clears the message waiting. I am waiting to hear how to change the user name; last solution didn't work.

from the main phone

menu
sys program
start
arrow (more optiolabeling
directory
extension
enter extension, then change the name

ill need to log into Manager and under that users tab, you can reset the password or delete the mailbox.

If you are using this phone on a Panasonic KX-TDA 30/100/200/600 system. From the Switcboard / Main telephone or Managers phone with the handset on the cradle/hook press Program * * or Program * # followed by the system password ( default is 1234). Now press 004 and then ENTER. Enter the extension number you want to change. Now enter the name (the same way as texting on a cellphone) To save the changes press AUTO DIAL / STORE. To go to the next extension press NEXT on the screen. When you are done lift the handset and put it down to exit program mode.
PLEASE rate/vote this answer if it was helpfull.
THANK YOU

you must change the number by programing the PBX or phisicaly change the jack in the PBX.Both solutions must be done by authorized personal.check who is serviceing your pbx and make a request.

It depends on your Mitel Telephone system.

If your system is an SX200 ICP ~ then going thru the Blue Superkey options the Mitel will let you change your own name.

But ~ if you have a 3300 ICP then the name change is only performed via the system programming.

This should be what your looking for..

From an individual extension with a Display Phone:

1. Press [ Feature ] [ 0 ] [ 0 ]
2. Press [ Left Intercom ] one time. The display reads: Enter Name (If a name was previously assigned to this extension, it displays instead.)
3. Enter the two-digit code for each character you want to enter. (See Valid Entries below)
   For example, to enter the name Andy, press [ 2 ] [ 1 ] [ 6 ] [ 2 ] [ 3 ] [ 1 ] [ 9 ] [ 3 ] . The display reads: 12 ANDY
4. If you make a mistake, you can press [ Mic ] to clear the display. Repeat Step 3 to enter the correct name.
5. Press [ Feature ] [ 0 ] [ 0 ] to exit programming mode.

Valid Entires:
Letters A-Z, numbers 0-9, and blank spaces.

Character and Digit Codes:
Letters: Numbers:
A=21 N=62 0=00
B=22 O=63 1=10
C=23 P=71 2=20
D=31 Q=72 3=30
E=32 R=73 4=40
F=33 S=74 5=50
G=41 T=81 6=60
H=42 U=82 7=70
I=43 V=83 8=80
J=51 W=91 9=90
K=52 X=92 BLANK = 11
L=53 Y=93
M=61 Z=94

hey do you know how to change the display names or better still do you know where i can get hold of a user manual for the DTU 16d nec phone thanks