Remove the memory card from the camera, look along the one edge for a tiny switch, slide it towards the contacts to unlock the card, the switch farthest from the contacts is in the locked position to prevent deletion. Now! if the card is in the unlocked position slide it back forth to reset the card, if it fails the card should be replaced.
Take a look at the SD card. On the left side of it, there's a small plastic switch. Make sure it's switched to the upper position. If that doesn't help, the mechanical switch inside the camera that detects if the SD card is locked, is broken. It has to be taken apart to repair it - you will have to give it to a technician.
Tom
Remove the card from the camera. The is a little switch on the left side. Slide it up. Put the card back in. Should be unlocked.
SOURCE: i have a samsung digmax s600 i works fine without
Be sure you have a standard SD card to put into this camera, not a SDHC type.
You will be limited to a maximum of 2GB with SD, but it should work perfectly.
If not, check the SD card in a notebook or PC's cardreader and/or replace the
SD card with another one. If this does not work the SD card interface in the
camera may be defective.
86 views
Usually answered in minutes!
×