Just bought a 46" Samsung

There are several support documents for the Denon AVR-589 available on the product page: https://www.denon.com/en-us/product/av-receivers/avr-589 . The current link to the owner's manual is http://assets.denon.com/DocumentMaster/us/AVR-589-OM-E_105A.pdf . There are also Quick Start Guides.

I hope this helps.

Cindy Wells

Denon AVR 3806 do not support 3d.
hdmi version 1.1

I understand, it's something I've misunderstood on my denon avr-790 as well when connected to a samsung 8000 series led tv.
The answer isn't in the receiver's settings (you can be on whatever source you want on the receiver end when toggling the menu). You need to toggle through the tv's sources to find the menu (usually found on hdmi 1). I've spent towards an hour recently troubleshooting only to find that it was the tv's source that wasn't set properly and I was trying to change the receiver's settings instead of the tv's source.
Hope that helps!

RTFM. Your external digital sources are responsible for delivering the digital content. They probably have manuals, too.

Register and download the manual for free at retrevo.com

http://www.retrevo.com/support/Denon-AVR-589-Receivers-manual/id/23110dj893/t/2/

What's the make and model of the subwoofer? It sounds like it's a passive (unpowered) speaker.

http://www.retrevo.com/support/Denon-AVR-589-Receivers-manual/id/23110dj893/t/2/

See page 9

I seriously doubt your test mode worked fine on the subwoofer level adjustmnent.

Get a powered (active) sub.

Long and painful answer!!! However, in the end, you need to bypass HDMI thru your receiver and go direct to the TV. Connect Digital Coaxial or Optical for audio to your receiver. Your version of HDMI in your receiver is not compatable with today's HDMI version. Yours is 1.1a and the current version is 1.3b going to 1.4. If you want detailed info as to "why", just google "HDMI 1.1 problems" you can read for hours! Sorry for the bad news! However, it is what it is. Hope this helps. If you need further help with setup, post a comment and I can give you further help.

I have been trying to find a way to do this for over a year, Denon & DirecTV ay they are not compatable

even if the wires are not touching they can still arch. make sure there is no bare wire showing ie. cannot see any unshielde speaker wires. id unplug then replug back in

Hello,
I want to clairify you install, you sat you have I an HDMI cable running from the Time Warner Cable box to the AVR-589, going in to the TV/CBL input. From the Denon AVR-589, I have an HDMI cable running from the output to my Toshiba RV525U television.

Check the connection at the TV, if as you indicated above you have an HDMI cable from the HDMI out from the Denon to an HDMI output on the TV, if this is the case you need to have that HDMI cable plugged into an input on the TV not an output

Just click and choose whatever connection you want;


DVD Players/Recorders: Home Theater Setup, Installation & Hook Up ..

• Audio and Video Connection Guide
• What is HDMI Technology?
• HDMI Explained in Detail
• Audio and Video Definitions

Plasma or Video Projector Wiring Guide

Blue-ray Surround Wiring
Hope this may help;

Regards,
VOTIT

DON'T FORGET TO RATE