I have just purchased a Polaroid PoGo. The first photo that I printed from it was quite good quality but the next 4 I have printed have streaks running through them. I have tried cleaning the print head the way they suggest by putting in one of the photo papers upside down with the watermark facing upwards and running it through the print head but still the photos are streaky. I have even used another pack of the ZINK photo paper incase the first was damaged. Do you have the answer or do I need to send it back to Amazon

I do not have the LG touch mobile, but experienced a similar problem with another device. It didn't work at al: I selected a photo, say print and sent it via bluetooth to the POGO, it didn't connect.
The solution that worked was: Not give a PRINT-command! Just SEND your picture to the POGO by bluetooth, and it will start printing.

If you are a little handy you can clean the gearwheels yourself. Read and see how:
http://henningmakingit.wordpress.com/2011/05/21/how-to-repair-your-polaroid-pogo-printer/

Try sending the blue registration paper with the barcode through the printer.

Download the "Polaroid Pogo App" from the Android Marketplace. This will solve the problem of the Pogo rejecting your phone. It also has other features like different "frame shots" or printing one picture over 4 sheets. Best of all - it's free!

Be shure that the part to be printed is facing you and the "polaroid" logo is facing down

The way to solve the problem is as follows:
1. Goto the My Stuff Icon and select the "My images" Icon.
2. Select a Photo to open it.
3. Click the drop the drop down menu (▤), and click rename.
4. Type in a name then .jpg and save.
5. Then "send" it to bluetooth.
Voila! Good luck everyone.

TO CLEAN PRINT HEAD, TAKE AN A4 SHEET OF PAPER CUT IT TO SIZE FOR THE POGO,BUT MAKE IT (3) THREE THIKNESSES THIK, FEED IT IN UNDER THE PRINT HEAD AND CLOSE LID, WHILE THE PAPER IS BEING EJECTED PUSH UP ON THE PAPER THAT IS BEING EJECTED WITH YOUR FINGERS, YOU MAY NEED TO DO THIS A NUMBER OF TIMES, BUT IT WILL CLEAR THE STREAKING. IT WORKED FOR ME AND MY POGO DOSE BRILLIANT PRINTS.HOPE THIS HELPS PEOPLE. JB

when printing make sure that the paper is inserted in the pogo shiny side up and logo facing down. also try putting through the blue alignment sheet first as the pogo will not work without this. hope this helps

Issue: Banded or streaked prints
Solution: Change the Print Quality Settings (Windows)

Change the Print Quality Settings (Windows) The Quality setting controls how finely ink droplets are placed on the printed page. Depending on the type of paper being used a higher Print Quality setting does not always insure a better print. Print speed will decrease as the Print Quality setting is increased. Follow the instructions below to change the print quality settings in the Canon printer driver for the Windows operating system through a printing application.

1. Click 'Properties' in the Print dialog box.
   
   Note: Depending on the Application software, 'Properties' may be displayed as 'Preferences'.
   
   
2. Set the desired print quality in the 'Print Quality' section.
   
   
3. Select 'High', 'Standard', or 'Draft / Fast'.
   

To set more detailed print quality settings, follow this procedure:

1. Select 'Custom' and click 'Set'.
   
   
   
   
2. In the Set Print Quality dialog drag the slide bar from 'Fast' to 'Fine' to select the print quality.
   
   
   
   Note: There are five options in 'Quality'. However, selectable options are limited depending on the media type.
   
   
3. Select 'Auto', 'Dither', or 'Diffusion' from the 'Halftoning' section.

You can only connect the Pogo to a PC by using a Bluetooth wireless connection. Once a bluetooth connection is established between your PC and the PoGo you can print by simply using Explorer to send a JPEG file to the PoGo via Bluetooth (no printer driver needed).