What does error code f71 mean? - Kenmore Elite 45986 Front Load Washer

So F71 does mean that your touchpad is failing or one of the buttons is sticking. Try to unplug the oven and use a hair dryer to heat up the touchpad. Rub the buttons with your thumb in case one of them is sticking and then let the unit cool down. Plug the oven back in and if you still get an F71 error, the only thing you can do is replace the touchpad

WHIRLPOOL CABRIO WASHER ERROR F71. The Cabrio Washer Error F71 code is the same as the SD code: This error means the main control board detects too much drag on the basket during the spin cycle.Mar 29, 2017

Hi,

F71 points at a connection error between button pad and control board.

Please read the indications in this article: F70 and F71 are two logic board error codes...

Regards.

Hi.

Please read the tip below, explaining how to fix F70 and F71 problems. The comment applies to Whirlpool washers like the one in question.

F70 and F71 are two logic board error codes that point at a communication error between the main log...

Regards.

Ginko.

Hi,

F71 points at a connection error between button pad and control board.

Please read the indications in this article: F70 and F71 are two logic board error codes...

Regards.

Hi,

F71 points at a connection error between button pad and control board.

Please read the indications in this article: F70 and F71 are two logic board error codes...

Regards.

Hi.

Sorry for the late reply.

F71 points at a connection error between button pad and control board.

Please read the indications in this article: F70 and F71 are two logic board error codes...

If you get similar problems in the future, and machine gets stuck in error mode with clothes inside, empty water from tub disconnecting the drain filter, located behind a panel in front lower side of appliance. After emptying water the door will normally get opened.

Regards.

Hi.

Please click on the link below and read the indications about errors F70 and F71:

F70 and F71 are two logic board error codes that point at a communication error between the main log

Hi.

Please read the tip below, explaining how to fix F70 and F71 problems. The comment applies to Whirlpool built kenmore washers like the one in question.

F70 and F71 are two logic board error codes that point at a communication error between the main log...

Regards.

Ginko.