How to pair to the phone - Plantronics Explorer 240 Bluetooth Headset

Hi. There is an option to forget bt devices. Forget all of them. Pair your phone again automatically

your phone only can pair 2 phonr, check your connection setting it will appear your phone that you pair unpair from that

Hi,it's very easy to pair.

First get one of the phones blue tooth on, and pair with the other phone .
When pairing,it will ask you for password key, you can use any number of your choice, but it has to be a four digit number.(Any four digit number) eg 1234,1111,0000 etc.
Ones you type in the code you want to use for pairing, it wlll ask you on the other phone you are trying to pair to type in that the same code and your done with pairing you, Ones the other phone recognizing the phone you paired it with you can now send data to each other.

If it does not pair immediately, restart the phone and try again.

Good luck.

Hi,

It all depends. When you want to connect a blue tooth to a phone, You will need to switch on the blue tooth device and the phones blue tooth you are pairing with.

When pairing both device, you will ask for pairing code, You four digit numbers(default code(0000). and pair.

After pairing both device, you detected paired, you can now use the blue tooth device with your phone.

there are no special code for pairing Blue tooth device.
Normal codes used are any four digit, four numbers you want to use.(0000, 1234).


Take care.

Hi, you will need pair both phones together before you can be able to send .

Hi,

It all depends. When you want to connect a blue tooth to a phone, You will need to switch on the blue tooth device and the phones blue tooth you are pairing with.

When pairing both device, you will ask for pairing code, You four digit numbers(default code(0000). and pair.

After pairing both device, you detected paired, you can now use the blue tooth device with your phone.

there are no special code for pairing Blue tooth device.
Normal codes used are any four digit, four numbers you want to use.(0000, 1234).


Take care.

You Need To Type In A 4 Digit PassCode To Get Through To Another BlueTooth Device. Pairing Bluetooth Phones Is Kind Of Complicated. If You Are Pairing 2 Phones... Here Are The Steps:

1.) Find The Other Phone By Searching For It On BlueTooth

2.) Select The Device/Phone You Want To Pair With

3.) Enter The Last 4 Digits Of The Phone Your Trying To Pair With's Phone Number

4.) The Other Phone Should Be Asked If It Wants To Pair With Your Phone, Say Yes

5.) Type In The Last 4 Digits Again Of The Phone Your Trying To Pair With's Phone Number, Except This Time ON The Phone You Are Trying To Pair With

6.) You Should Get A Paired Successful

Pairing With Any Other BlueTooth Enabled Device:

1.) Search Through BlueTooth For The BlueTooth Enabled Device You Want To Pair To

2.) Select The Device You Want To Pair With

3.) Read The Instruction Manual That Came With The BlueTooth Device You Are Trying To Pair With, You Should Find A Pair Key In There Somewhere

4.) Enter The Passkey You Found (OR Already Know) And You Should Be Ready To Go

If All Else Fails, The BlueTooth Is Obviously Broken On Your Phone... Exchange It For A New One

• general instructions for no specific phone and device to pair
• turn on both devices (phone and other device)
• on the phone search for a bluetooth devices(that is on)
• if the other device is asking for a password, enter a known password to success the pairing
• or else it will pair automatically for a non password pairing
  

Try this: 1. Ensure that your phone is switched on. 2. If the headset has not been previously paired with a device, switch on the headset. The headset enters the pairing mode, and the indicator light starts to flash blue quickly. If the headset has been previously paired with another device, switch off the headset, and press and hold the multifunction key until the indicator light starts to flash blue quickly. 3. Activate the Bluetooth feature on the phone, and set it to search for Bluetooth devices. See the user guide of your phone for instructions. 4. Select the headset from the list of found devices. 5. Enter the passcode 0000 to pair and connect the headset to your phone. In some phones, you may need to make the connection separately after pairing. You only need to pair the headset with your phone once. If pairing is successful, the headset appears in the menu of the mobile phone where you can view the currently paired Bluetooth devices. When the headset is connected with your mobile phone and ready for use, the indicator light of the headset slowly flashes blue.

This solution came from Parrot Tech Support and it worked for me:

We were able to get the two to pair using the following steps:
The phone will stay saying pairing, then the parrot will say pairing successful, pull the battery on the phone, when you turn it back on, the phone will display PARROT CK3100 WANTS TO PAIR, ACCEPT? Say YES.

have ya phone ready to almost pair. Then on the 850 ear piece press the call button until lit and then open boom up and press the phone pairing ok button and the 850 should work. waaala!
See how easy that was.