Pictures not transferring from camera to computer

Consider NOT connecting your camera to your computer.

The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries.

Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive, the same way you copy any other files. Or you can use Nikon Transfer or any other photo cataloging program.

Consider NOT connecting your camera to your computer.

The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries.

Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive, the same way you copy any other files. Or you can use Nikon Transfer or any other photo cataloging program.

Get a card reader. Use it from now on to transfer your pictures to the computer. Remove the card and battery from the camera...press all the buttons...leave it alone for 20 minutes...insert the card and then the battery...turn it on.

Hi,
The possible solution's are
1 . First uninstall the photosmart software from the system and reinstall the software once again . Install in C: drive and then connect usb and transfer photos this will work . If this doesn't work then try in another usb port of the computer and transfer photo's .

2. Photo's will be in memory card ,better get memory card reader and take out the memory card from the camera and insert it into the card reader . Now connect card reader to computer and transfer photo's .


Hope this helps .

Have you downloaded the Kodak Easyshare software? It will be easier to transfer picture from the camera to the computer also easyshare software has feature to enchance picture download not to mention that you can send picture thru email using the esayshare software. To download the software visit www.kodak.com/go/easysharesw.

Transferring pictures/videos with the USB cable
1 Turn off the camera.
2 Plug the labeled end of the USB cable into the USB port on your computer.
3 Plug the other end of the USB cable into the USB port on the camera.
4 Turn on the camera.
Note: EasyShare software opens on your computer. The software prompts you through the transfer process.

If still having issue importing picture from the camera to the computer call Kodak support line at 1 800 235 6325 (23KODAK)

The process only works one way...you can download pictures taken on your camera to your computer but you cannot download pictures from your computer to the card and play them back on your camera.

Try using a separate card reader to download your pictures to a folder you create on your desktop.

Consider NOT connecting your camera to your computer.


The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries.


Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive, the same way you copy any other files. Or you can use Nikon Transfer or any other photo cataloging program.

Resetting the camera to factory presets did the trick!

ok

Do you have any disk or software package of your camera? you need to install it to the computer. It serves as driver for your camera.

to import your pictures in the camera i suggest that use your memory card if you have a card reader to transfer files.