My phone ringer accidentally got turned off how do I get it back on panasonic PQLV30054ZAS

The KX-TGA410 is a handset for several Panasonic cordless phone systems, including the KX-TG411X. (X indicates the original number of handsets sold with the phone system.)

Is the answering system set for "Greeting Only" or did you turn off the ringer? If you have set the system to greeting only, with the phone in standby mode (no calls in or out), press Menu # 3 0 5 . This accesses the Caller's Recording Time. Use the Up/Down arrows to select a recording length. Press the soft key for Save the selection. The options are "Greeting Only", "1 minute" and "3 minutes". Press Off to exit the menu. See page 36 of the manual: https://www.manualslib.com/manual/771326/Panasonic-Kx-Tg4111c.html?page=36#manual

Alternatively, you can press Menu and navigate to Answering Device > Settings > Recording Time. Use the Up/Down arrows to reach an item in the menu and the press Select (same soft key as Menu) to enter a sub-menu. See https://www.manualslib.com/manual/771326/Panasonic-Kx-Tg4111c.html?page=22#manual .

If the ringer volume on the handset is set to zero (off), go to the Initial Setting > Ringer Settings > Ringer Volume from the handset. Alternatively: Menu # 1 6 0 . For the base, just press Volume +.

The manual for this system is available at ManualsLib: https://www.manualslib.com/manual/771326/Panasonic-Kx-Tg4111c.html .

I hope this helps.

Cindy Wells

Go in to the settings on the handset, look for ringing or ringer and turn the tone from off to on.

If this is a Panasonic phone connected to a phone system as in an office setting, sounds like the ringer has been turned off. Get someone to call your phone and while they are calling turn the jog dial to turn the ringer back on or use the LCD intertactive keys to turn the ringer back on.

To solve it, I pressed Menu then the silver down arrow to access the Ringer Settings. For some reason, I was trying to use the black buttons beside the Menu button to navigate.

Thanks anyway!

I found a free online owners' manual and read it. Thanks, though.

Thanks for giving me the opportunity to help with your problem.

The "ringer off' message on the base display is referring to the ringer on the "base" unit not the phone ringers. Your phone handset(s) will still ring even when the base ringer turned off.

To turn the ringer on the base back on press and hold push the ^ symbol on the base until it beeps two times, To turn the base ringer off, press and hold the v symbol until the unit beeps.

If my information has proven to be of help, please give me good rating. Thanks for using FixYa!

No problem, just push the volume up key untill the ringer is at the level you want it.

press menu,scroll down to ringer settings,hit select,scroll to ringer volume and hit select then press up the round button in the middle until you hear it make a "ring" sound. adjust your preferred volume and hit save.

To connect a standard answering machine to this phone, it needs to be wired to a DHLC port and XDP Mode has to be set to "Off." In addition, the Parallel Ringer feature needs to be set to "On" or your ringing phone won't ever ring the answering machine!


We have a support package that allows us to make all the changes you need over the Internet for a flat annual fee. If you want your whole system to work properly and all changes to be made for you at a flat budget, call us at 877-236-8376.

You can download the manual for a very similar phone, the KX-TG2302 at http://service.us.panasonic.com/OperMan/findmanual.aspx?cat=TEL and you can figure out all the features of a KX-TG2303. The simple answer is: while you are not using the phone, press the up or down volume button and it should turn the ringer back on. To turn the ringer back off, press and hold the down volume button until you hear two beeps. You can adjust the volume while the phone is ringing. The manual will tell you how to change your ringer tones, etc.