Water wont feed for either cleaning or coffee making

No water/coffee coming through the Caffitaly ...
11 answers
Feb 11, 2019
I make small coffe from B30 but the coffe is not really
11 answers
Feb 10, 2019
SOLVED: I am trying to descale my Tassimo coffee ...
1 answer
Apr 4, 2018
Descaling light wont go off after descaling.
11 answers
Feb 21, 2010
More results from www.fixya.com
https://www.thermador.com/us/support/customer-care/faqs/coffee-machine

Blocked feed line in machine needs cleaning out

I thought these are pour over brewers? Which means you have to fill it with water in order to brew? It should happen when the unit is filled first, plugged in then turned on.(see link below for MFR instructions) Aloha! ukeboy57

http://www.bunn.com/sites/default/files/care-and-cleaning/43097_0002d01_velocity_brew_manual_english-_bt_st.pdf

if you are not getting any coffee made at all then descaling wont help you. i remove the water container and you will see a little hole with a screen inside of it. i either take tweezers and fish around for any particles that are in there. i was absolutly shocked to find little fuzz pieces. this dust will block up the machine so it wont work. i have also {at work} unplugged unit and take off water resevoir and put sink water into hole for a bit, being carefull not to complety soak whole unit . then i dry it well and plug it back in. works like a charm for me. i have 2 keurigs and 1 that i manage at work. as far as descaling , once its back running you could put a half cup of vinegar and fill the rest with water and keep making fake cups of coffee till empty . then i refill with clean water and run a couple more times. this is really good for keeping the needle free from getting plugged. as soon as i have any problem with my machine not making full cups of coffee i will clean that bottom screen under water resevoir, and it always works for me. good luck.

try to brew hot water only "no coffee" if the water comes out you need to clean the exit needle and descale your machine if no water you have possibly faulty pump.

Hi,

Here is a tip that I wrote that will give you some things to try that will helpyou get your Keurig coffee brewer workingagain.

Keurig CoffeeBrewer not making a full cup of Coffee
heatman101

Hi,

Here is a tip that I wrote that will give you some things to try that will helpyou get your Keurig coffee brewer workingagain.

Keurig CoffeeBrewer not making a full cup of Coffee
heatman101

Usually water in the grounds container is caused by the coffee solenoid valve return side being blocked from dry coffee. Using cleaning tubelets to clean the coffee grounds out. If that doesn't work then you should remove the solenoid and clean it out with warm water. If that still doesn't rid you of the wet grinds you should have a certified repair tech take a look at it. You may end up having to replace the solenoid but that should be verified by a tech before you spend the money.

You have an obstruction in the feed line to the heating element. I found coffee grounds before the check valve. I had to take the bottom off it which I am sure the manufacture wouldn't approve of but I was at my wits end and ready to toss it. I just brewed a full pot 10 minutes!!!