Please. how can i setup speed dialing on my phone

Not normally, because would you want Julie in Accounting speed dialling your Husband by mistake. Making wide assumption you are female, but you get the drift. Manuals and video in the link.

https://www.google.com/search?q=setup+the+speed+dial+on+the+main+set+of+the+PABX+KX-TEM824+can+i+use+the+speed+dial+on+the+extensions

..

Panisonictel.com has a FAQ for this model here

In that FAQ, there is this explanation of your problem:

When I tried to access speed dial, it does not call out.
When storing speed dial number of external parties, the stored speed dial number must include CO (outside line) access code (9 or 81…etc) even with direct line access. If the external number is 1234567, you must store the speed dial number as 91234567.
This rule applies to all system speed dial, station speed dial and speed dial key.

It looks like you're just going to have to add a leading 9 to all the speed dial numbers for that function to work.

Changes to the contents stored in the address book do not become effective in the stored speed dial numbers in Windows®. Description:If you have made a change to the contents stored in the address book, the speed-dial is NOT automatically updated.

If you change the address book entry, please follow the steps below to store the speed dial number again.

1. Click on the setup button to open the Brother PC-FAX Setup dialog box.
   
   
   
   Notes:
   You can also access the Brother PC-FAX Setup dialog box by clicking start => Programs => Brother => MFC-XXXX or MFC-XXXX LAN (where XXXX is your model name) => PC-FAX Sending => PC-FAX Setup.
   
   
2. Click the Speed Dial tab.
   
   
   
   
   
3. Select the Speed Dial No. which includes the member or group you made a change in the address book, and then click Clear.
   
   
   
   
   
4. Click the Speed Dial No. you want to program.
   
   
   
   
   
5. Click the member or group you want to store on the Speed Dial again and click Add.
   
   
   
   
   
6. The Speed Dial is now registered with the new entry. Click OK.
   
   
   
   
   

If you put the patch below, the message that prompts you to confirm the destination number or address will appear when you send a fax using the speed dial. Also the message that indicates changes in the address book do not become effective in the stored speed dial numbers will appear when storing a speed dial.

1. Make a temporary folder on your HDD [hard disk drive] as the location to save the downloaded self-extracting file, e.g. C:\brodnt
2. Please click here to download the patch. (7.07MB)
3. The Brother End-User License Agreement will appear. If you agree to the terms, click I ACCEPT.
4. Download the file to the temporary folder created in Step 1.
5. Once downloading is complete, open the folder and double click PCFAXUPD.EXE.
6. The installation will start. Please follow the on-screen installation directions.

Trust this is helpful. Please vote. :)

Create speed dial entries for fax numbers that you use frequently. The number of speed dial entries you can set up depends on the HP device. For more information, see the specifications for the HP device.
To manually create a speed dial entry 1 In the HP Solution Center, click Settings, point to Fax Settings and Setup, and then click Fax Speed Dial Settings. 2 Click New Entry. 3 In the Speed Dial Settings - New Entry dialog box, type a name and fax number, and then click OK. 4 In the Speed Dial Settings dialog box, click Save. The entry is stored on the HP device.
Note If you are creating a speed dial entry for a networked HP device and you are unable to save the entry, another user on the network might have accessed the same speed dial. Wait a few minutes and try to save the entry again. To create a speed dial entry from the Address Book 1 In the HP Solution Center, click Settings, point to Fax Settings and Setup, and then click Fax Speed Dial Settings. 2 Under Address Book, click Select From. 3 In the Address Book dialog box, select one or more names, and then click OK. 4 In the Speed Dial Settings dialog box, click Save. The entry is stored on the HP device.
Note If you are creating a speed dial entry for a networked HP device and you are unable to save the entry, another user on the network might have accessed the same speed dial. Wait a few minutes and try to save the entry again.

For speed dial go to Main Menu >> settings >> initial setup >> Speed dial >> Phone Memory.

Than transfer numbers which you want to assign as speed dial in Phone memory.

Goto particular contact and edit the number and assign it as Speed dial.

Go to entry in address book, select Options > Add to Speed Dial then Select Position.

Sounds to me your trying to access your speed dial bins feature 0 then your speed dial will get you to the speed dial bins 71-92 this is your personel spedd dials your phone only 0-70 are system wide speed dials . Feature * 4 is not a feature in norstar systems.

This is for the manual http://www.lonelyplanet.ekit.com/userguides/v3_userguide_en.pdf

Dear rugrats

Please find below the direct download link to the user manual of the V360 phone (PDF file - 5.4Mb Download)

http://www.motorola.com/mdirect/manuals/V360_9495A85B.pdf

At page 45 & 46 you will find detailed information on how to setup the speed dial function of the phone.

Regards
Please don’t forget to rate this solution if it was helpful, it keeps us going!

Hi Menu => Contacts =>Speed dials. Good luck.