I am going to a school disco and I am in need of some help as we went to the cinema and saw big mommas like father like son and it is a movie disco so I would do with some help for a big mommas costume to show off to my bezziez! LOL

Have him go to a community college first. Less expense, stay at home, and cuts down on the partying. It also gives him time to mature. I skated through high school because I was bored. Went a year in CC and stopped. Went Bach to college when I was 21
.now I am a physician. Never too late, but we have to have a goal first. Here to help if you need it

I think it is your RAM chip. If you have 2 RAM chips put the one from the second bank and put it in the first and see if it boots up. RAM is pretty cheap now anyhow.

Tensioning a blade on a band saw usually means moving the upper driven wheel upwards. Remove/open the upper wheel cover and look for the lock bolts and the bolt that will jack the wheel upwards to tighten the blade. Loosen off the lock bolts, tension the blade - it needs to be pretty tight with virtually no sideways movement - and tighten the lock bolts. Replace the covers and lock the covers. Make sure that the wall plug is removed from the socket before you proceed with this operation - band saws know no mercy.

Hahahaha, Aaala! Kafi sochna para, is tarha ho ga mere khyaal se;
140 Saal teenoN ki mila k banti hay;

Pota: 7Years
Baap: 49Years
Dada: 84Years

7+49+84 = 140 (Theek)

Pota kitnay Month ka = 7 x 12 = 84 => Dada ki umer in years (Theek)

Pota kitnay Din ka = 7 x 365 = 2555din => Baap ki umer in weeks [ (49x365) / 7 ] = 2555 (Ye be Theek)

Concerned, Nooh bin Sikander

so, did you see this on a projector? why is it on here? if you find out the movie, let me know.

Try McMaster-Carr web site online. They have about everything related including machinist scales.
http://www.mcmaster.com/#machinists'-scales/=3zmamp

This sounds like a fan belt prob! Check it out! frankster016