Motorola Razr phone turns on ,insert code and the display says SIM disabled Only emergency calls allowed?? What gives

Wayne
You have to have a SIM in the phone if you don't have one. Otherwise Emergency calls only. If you do have a SIM but you are getting that it means the Sim is not detected or is inactive or you've pressed emergency call and the phone is locked. You should have a back button to dismiss emergency dialer and enter pin or pass code.

Mark
Motorola Support

Need to be reset by provider

it may be due to network lock,you can check here http://www.theunlockarena.com/faq/rs13wp27/how-do-i-know-if-my-mobile-phone-is-locked/122/ whether it is locked you can get unlock codes here http://www.theunlockarena.com/motorola-motorazr-maxx-v3/rs13wp9/
you need to specify the country and network provider

Sim disabled try another sim card on the phone, you will most likely have to get a new sim card, contact your service provider and ask about a new sim card.

No you probably have a bad battery, also the emergency calls only means it is probably PUK locked, call provider to get the code.

it sounds like you might have a different sim card and did not let t-mobile know. if you don't have a new sim card in the phone then you might try 1234 then call or 0000 then call

Your phone is not recognizing your sim.Any sell phone that is charged can be used for emergency calls.

tk46

sim is the card you were given to work your phone and make calls.
Well it sounds like you need to put your simcard in the phone and it will be working.

If you need assistance you should have a customer rep in store help you.

The best things you can do this is go to service center and check for soution because its a hardware problem.

there is not problem in your mobile . just try another sim card.there is problem in your sim serivce