Where to purchase ribbon cables for dual receivers

You have identified a problem with the IR sensor on your JVC LT-58MAW595 television. The IR sensor is responsible for receiving signals from the remote control, so if it is damaged or not functioning correctly, the tv may not respond to remote commands.
If the IR sensor is caved in and has scraped the gold ribbon cable that is in line with the sensor box, the ribbon cable has also likely been damaged. The ribbon cable is a thin, flexible circuit board that connects the IR sensor to the main circuit board of the television.
In this case, you may need to replace the ribbon cable to repair the IR sensor. The ribbon cable is a small part, and it is not a common one; it is part of the main circuit board of the television.
It is not recommended to try to repair the ribbon cable; it is best to replace it with a new one.
The part you are looking for might be hard to find, and it might be best to contact JVC or a professional technician to determine the availability of the ribbon cable and the replacement cost.
Keep in mind that working with the main circuit board of the television requires technical knowledge and skill; it's best to have a professional technician perform the repair.

Try replacing the ribbon cable

Which ribbon cable do you need? If you are in the U.S. you can probably get it from pacparts.com or call them at (800)421-5080.

Go to www.ebay.com Type: make and model of laptop, refine search to keyboard and ribbon cable. Since I don't know the brand of laptop or model see what turns up.

You need a ribbon cable replacement to the faceplate at the very least.

It's my understanding that there is an ribbon cable that needs to be replaced - it's Pioneer CNP6498 flex cable (CN871 to CN1801) at pacparts.com. Price is less than $9.00, but shipping there is crippling to say the least ($11.50 - WTF??!?!?!)

IF you find that the detachable faceplate also does not work, there is an additional ribbon cable that needs to be replaced. Try "DEH-P960MP" on ebay and you can find a replacement for less than $30 shipped. I received mine in 2 days and had it up and running within 20 minutes. It solved the problem.

You need a ribbon cable replacement to the faceplate at the very least.

Look the replacement cable up on ebay under "DEH-P960MP" and you can find a replacement for less than $30 shipped. I received mine in 2 days and had it up and running within 20 minutes. It solved the problem.

IF you find that the upper face (with the OEL display) also does not work, it's my understanding that there is an additional ribbon cable that needs to be replaced - it's Pioneer CNP6498 flex cable (CN871 to CN1801) at pacparts.com. Price is less than $9.00, but shipping there is crippling to say the least ($11.50 - WTF??!?!?!)

You need a ribbon cable replacement at the very least.

It's my understanding that there is a ribbon cable that needs to be replaced - it's Pioneer CNP6498 flex cable (CN871 to CN1801) at pacparts.com. Price is less than $9.00, but shipping there is crippling to say the least ($11.50 - WTF??!?!?!)

What part is missing? Is it just the faceplate, or the gear mechanism as well?

I have one of these that the ribbon cable is bad and can't seem to find a replacement. I am debating just buying a new stereo. If i do, I could sell you the faceplate. email me at rad73082 (at) yahoo

the faceplate has a loose or broken contact on one of the wires on the ribbon wire located in back of where the faceplate mount. the ribbon wire is expensive and you must open the radio and install it. the wire is about 30 bucks plus shipping from the dual company or namsung. you can also find the ribbon wire for sale at ebay.com or parts.com

Check the face where the buttons are the face got o little hole when you can reset the functions push it maybe that solves your problem good luck