I dont know my pass key number - Jabra BT2050 Bluetooth Headset

The default passkey is 0000

Hope this works.

If I understand you correctly, the key number should be on the router somewhere. It usually is on a sticker near or next to the serial number and/or MAC address number. It will probably be a 4 to 6 digital number.

hope that helps.

You can use a pass-phrase scanner which will find and display the network pass-phrase and key. Or if its a small network then you can reset the router to factory defaults and use the default password to re-setup the network.. Sometimes its easier to reset to factory defaults but you have to have all your ducks in a row. You need to know the WAN details and any printer specifics and open port details etc.

..and you will have to setup every machine on the network to use the new passphrase/key. ..ooorrrr get a network scanner to reveal the pass phrase/key

My experience has always been default wep numbers are set as 0000

Push and hold the RESET Switch on the back of the router for 10 seconds then restart your computer.

The pass key is a number the bluetooth headset uses so it can connect to the cell phone. The pass key for the headset should be 0000...Hope that helps.

Did you write it down.

Most PINs are set to the code 0000 out of the box. Unless you or someone else chnaged it, that should still be the PIN number.

Your Ultra Mp3 Player
License Key : 27581

yes... the default is "0000". :)

- J.