Can you print a configuration page on this device. I need the meter reads/volumes.

You need to print the configuration page. Scroll through the menus on the printer until you find administration, then select reports and then configuration page. The engine cycles will appear in the upper left hand side of the first page that prints.

Try this link:
Read the Billing Meter The total number of printed pages can be reviewed at the Printer Control Panel, on the Configuration Page, and in CentreWare Internet Services (CWIS).
Three meters are available:

• Total Impressions
• Color Impressions
• Black Impressions

The billing meter counts the number of pages that were printed properly.

• 1-sided prints, including N-up, are counted as one impression.
• 2-sided prints, including N-up, are counted as two.
  
  NOTE: During 2-sided printing, if an error occurs after one side is printed properly, it is counted as one.
• Color documents converted using an ICC profile on applications with the Color (Auto) setting can print in color, even if displayed in black and white. The data prints in color even if it seems to be black and white data on the Display Screen. In that case, the number of Color Impressions is increased.
  
  NOTE: Grayscale images printed with the composite black setting count as color pages because color consumables are used. Composite black is the default setting on most printers.
• When printing automatic 2-sided printing, a blank page can be inserted automatically depending on the settings in the application. In this case, the blank page is counted as one page.

View the Billing Meters:
IMPORTANT: The Bill Meters track the total number of pages printed for the life of the printer; it cannot be reset.
To view the total number of pages printed:

1. Press the [System] button on the Control Panel.
2. Press the [Up] or [Down] arrow button until "Billing Meters" is selected, and then press the [OK] button. The Print Volume Report will be printed.
3. Press the [Down] arrow button to scroll to the required meter. The number of printed pages is displayed below the name.
4. Press the [Return] button to exit the Billing Meters menu.

http://wss.support.xerox.com/GTConnect/UnifiedAcceptor/AddWebFramework.Main/site/XeroxProductSupport/product/product_wc6505/lang/en-US/region/region_US/source/DND/Xlang/en_US/Xcntry/USA/prodID/WC6505/KBlang/en/#!view-content/ViewContent/View/contentId/x_6130_en-O8884

Configuration page denotes total gape count..
Press menu button...scroll to information..enter...scroll to configuration page...enter..

how to retrieve the meter reading-
allow the machine to come to ready-
press the down arrow on the printer keypad ( information) then press tick -
press down arrow again (configuration) press tick.
the printer now print 2-3 pages of printer configurations inc life cycles and net card configs

Hello!
You need to print a configuration page.

Press and hold the Cancel button for about 5 seconds.
A configuration page prints out.

Print properties, advanced options tab, smart organizing monitor button, user tools tab, print a configuration page. Counter is in the bottom left of the printed page

You have to print out the meter report.

1. Press the [Reports] button on the Control Panel
   
   
   
   
2. Press the [Up] or [Down] arrow until 'Systems Data' is displayed on the Display Screen.
3. Press the [Enter] button.
   
   The System Data list will be printed with the following information:
   • Total Page Counts: Total number of pages printed
   • CRU Prints: Number of pages printed using the current Toner (Dry Ink) Cartridge
   • Replaced Toner Counts: Number of new Toner Cartridges installed in the machine
   • Replaced Drum Counts: Number of new Drum Cartridges installed in the machine
   • Current Drum Page Counts: Number of pages printed using the current Drum Cartridge
   • Platen Scan Page Counts: Number of pages scanned using the Document Glass
   • ADF Scan Page Counts: Number of pages scann

Print a configuration page using the menu on the printer. Press the check button, then scroll down to the info menu, press check button, scroll down to configuration page, press the check button. The printer will print the page and give the page count for your printer. There is also a "supplies" info page under the same info menu that will give you the levels for each toner cartridge.

Hope that helps you.

To print a Configuration page from the printer, press
and hold the Go button for 5 seconds

Print a configuration page. It will be on there. Menu, lists/prints, config page.