My washing is saying error 2 - Haier HWD1000

help in the link. One article says it is a $1,000 repair and if that is the case, you call for service so you get the correct diagnosis and warranty.

https://www.google.com/search?q=Miele+washing+machine+error+F53

..

When you start your machine is the water just go stop go stop,
Just wait for the machine to display an error code on the wash progress lights and beeps constantly.
It could be the Rotor Position Sensor, out of balance switch or lid magnetic reed switch.
Your error code will determine this.
Is your machine beeping & showing a weird pattern of lights on the wash cycle, It is displaying an error code,
To read this error code you start at the red spin light & work to the left only add up the lights that are on. Red spin light = 1 2nd rinse light =2 1st rinse light =4 last wash light=8 4th wash light=16 3rd wash light=32 2nd wash light=64 1st wash light=128

this error happen when the temperature increase 7c or more in 1 minutes o by 2c in 2 minutes
Turn OFF the machine for clear and turn ON again.
God bless you

http://www.fixya.com/support/t10143344-hoover_

 

Hi take a look there.

kvedja

kolbrun

Hi.

F-22 is door lock error. The door lock was already defective and now has failed completely. You need to replace the door lock.

Here the error explained in detail:

F22
DOOR LOCK ERROR
Theme Door Lock message is prompted when the door cannot be locked. The CCU (central control unit) will try to lock the door six times before displaying the F 22 error code.

Possible Causes:

The door lock mechanism is broken or removed from door.
Door switch/lock unit failure.

Repair Procedure:

1. Unplug washer or disconnect power.
2. Check door switch/lock unit.
3. Check the wire harness connections to the door switch/lock, and the central control unit.

Regards.

Ginko

does the drain have a filter? many new ones do.

OE is a drain error - Check there isn't a kink in your drain hose, ensure the filter is clean, the drain hose can become clogged with sludge, sometimes a hot wash with 1/2 a cup of vinegar will remove this sludge

i have a maytag washer and it says E3 and it will not work,does anyone know what that means please let me know...thanks

The error code 7 is in fact a motor error.
The motor that drives the spin cycle has become faulty. The only solution now is to get an engineer in to fix it or get it sent away to get repaired.