I have just purchased an avex universal urc-r6 remote and i cannot seem to find the way to program it for my vip 722 dvr receiver.

AVEX URC R6 Universal Remote Control Entry



Follow these steps to program your URC R6 Universal Remote control:

1. Turn on the component you want to program.
2. On the AVEX R6, press the Component button that you want to program and the SELECT [SEL] button at the same time. Hold down both buttons for 2 seconds until the TV Component LED light turns on. This signals that you are in programming mode.
3. Enter the three digit code for your component. If this is the correct three digit number, your device will turn off.
4. Press the component button you just programmed (in this case TV) one more time to save the code number. The component LED light will blink three times to confirm that the code was successfully stored.

I hope that helps.
____________________________________________________________________
URC-R6 Manual Download

Download AVEX URC R6 Universal Remote Control Manual




Would you like to review the features of the AVEX URC R6 Universal Remote Control?

Have you lost your AVEX URC R6 Universal Remote Control Users Guide?

Would you like a digital, searchable, pdf version of the AVEX URC R6 Universal Remote Control Owners Manual?

Follow this link (& click FREE) to download a pdf version of the AVEX URC R6 Universal Remote Control documentation.

I hope that helps.
____________________________________________________________________
URC-R6 Remote Code Entry

AVEX URC R6 Universal Remote Control Entry



Follow these steps to program your URC R6 Universal Remote control:

1. Turn on the component you want to program.
2. On the AVEX R6, press the Component button that you want to program and the SELECT [SEL] button at the same time. Hold down both buttons for 2 seconds until the TV Component LED light turns on. This signals that you are in programming mode.
3. Enter the three digit code for your component. If this is the correct three digit number, your device will turn off.
4. Press the component button you just programmed (in this case TV) one more time to save the code number. The component LED light will blink three times to confirm that the code was successfully stored.

I hope that helps.
____________________________________________________________________
URC-R6 Manual Download

Download AVEX URC R6 Universal Remote Control Manual




Would you like to review the features of the AVEX URC R6 Universal Remote Control?

Have you lost your AVEX URC R6 Universal Remote Control Users Guide?

Would you like a digital, searchable, pdf version of the AVEX URC R6 Universal Remote Control Owners Manual?

Follow this link (& click FREE) to download a pdf version of the AVEX URC R6 Universal Remote Control documentation.

I hope that helps.
____________________________________________________________________
URC-R6 Remote Code Entry

DISH Solo DVR VIP612 Amplifier / Receiver Control



Would you like to program the Universal Remote that came with your Dish Solo DVR VIP 612 to control the volume of your receiver, tuner, or stereo instead of your TV's volume?




The first step in using the Universal Remote Control that came with your Dish Solo DVR VIP 612 to control the volume level of your receiver, tuner, or stereo is to program the remote to control your audio device using the AUX mode button.

Once your remote controls your audio device in AUX mode, you probably want to continue to control the volume of your stereo even if the remote is in SAT, TV or VCR mode.

To setup your Dish Solo DVR VIP 612 Universal Remote to control the volume of your stereo regardless of which mode it is in, follow these steps:

1. Press and hold the AUX button until all the mode buttons are lit, and then let it go.
2. Press the POUND (#) button.
3. Press the PLUS side of the VOLUME button.
4. Press 0.
5. Press the POUND (#) button. The AUX button flashes three times to tell you the programming is complete.
6. Confirm the VOLUME buttons are operating the tuner/amplifier's volume control by pressing SAT or TV, and then adjusting the volume. Your tuner/amplifier's volume should change rather than your TV's volume.

Your Dish Solo DVR VIP 612 Universal Remote is now setup to control the volume of your stereo regardless of which mode it is in

I hope that helps.
________________________________________________________________
DISH Solo DVR VIP612 Manual Download
DISH Solo DVR VIP612 Quick Reference Download
DISH Solo DVR VIP612 Remote Code Scan
DISH Solo DVR VIP612 Program TV VCR Remote Codes
DISH Solo DVR VIP612 Program AUX (Stereo/Receiver) Remote Codes
DISH Solo DVR VIP612 Amplifier Control
DISH Solo DVR VIP612 What Is Limited Mode
DISH Solo DVR VIP612 Change Limited Mode

DISH Solo DVR VIP612 Amplifier / Receiver Control



Would you like to program the Universal Remote that came with your Dish Solo DVR VIP 612 to control the volume of your receiver, tuner, or stereo instead of your TV's volume?




The first step in using the Universal Remote Control that came with your Dish Solo DVR VIP 612 to control the volume level of your receiver, tuner, or stereo is to program the remote to control your audio device using the AUX mode button.

Once your remote controls your audio device in AUX mode, you probably want to continue to control the volume of your stereo even if the remote is in SAT, TV or VCR mode.

To setup your Dish Solo DVR VIP 612 Universal Remote to control the volume of your stereo regardless of which mode it is in, follow these steps:

1. Press and hold the AUX button until all the mode buttons are lit, and then let it go.
2. Press the POUND (#) button.
3. Press the PLUS side of the VOLUME button.
4. Press 0.
5. Press the POUND (#) button. The AUX button flashes three times to tell you the programming is complete.
6. Confirm the VOLUME buttons are operating the tuner/amplifier's volume control by pressing SAT or TV, and then adjusting the volume. Your tuner/amplifier's volume should change rather than your TV's volume.

Your Dish Solo DVR VIP 612 Universal Remote is now setup to control the volume of your stereo regardless of which mode it is in

I hope that helps.
________________________________________________________________
DISH Solo DVR VIP612 Manual Download
DISH Solo DVR VIP612 Quick Reference Download
DISH Solo DVR VIP612 Remote Code Scan
DISH Solo DVR VIP612 Program TV VCR Remote Codes
DISH Solo DVR VIP612 Program AUX (Stereo/Receiver) Remote Codes
DISH Solo DVR VIP612 Amplifier Control
DISH Solo DVR VIP612 What Is Limited Mode
DISH Solo DVR VIP612 Change Limited Mode

DISH Solo DVR VIP612 Program AUX Remote Code



Would you like to program the Universal Remote that came with your Dish Solo DVR VIP 612 to control your receiver, tuner, stereo, second TV or second VCR using your remote's AUX mode? (Instructions to setup a primary TV or a VCR are a little different, but can be found here.)



To setup your Dish Solo DVR VIP 612 Universal Remote, follow these steps to enter the remote control codes to control a device with the AUX mode:

1. Turn the device you would like to control on.
2. Find the brand name of the device you would like to control in the control code tables on page 112 of the Dish Solo DVR VIP 612 User Manual.
3. Press and hold the AUX mode button until all the other buttons light up, and then let go. The AUX mode button will flash.
4. Press 0 for a TV, 1 for a VCR, or 2 for a receiver, amplifier or tuner.
5. Enter one of the three-digit codes from the tables in the manual.
6. Press POUND (#). The mode button will flash three times.
7. Press POWER to turn off the device. If the device does not turn off, skip to step 9.
8. Turn the device back on and try some of the other buttons to make sure they work. If the code works, stop here.
9. If the code didn't work, repeat steps 3 through 7 with the next device code from the tables in the manual.

Your device control codes for your amplifier or other AUX device are now programmed into your DISH Solo DVR ViP 612.

Now you probably want to set your Dish Solo DVR VIP 612 Universal Remote up so that it always controls the volume of your stereo, rather than of your TV, regardless of whether it is in SAT, TV, VCR or AUX mode. Help for this remote control programming can be found here.

(Help for programming a TV or VCR using the TV or VCR mode buttons can be found here.)

I hope that helps.
________________________________________________________________
DISH Solo DVR VIP612 Manual Download
DISH Solo DVR VIP612 Quick Reference Download
DISH Solo DVR VIP612 Remote Code Scan
DISH Solo DVR VIP612 Program TV VCR Remote Codes
DISH Solo DVR VIP612 Program AUX (Stereo/Receiver) Remote Codes
DISH Solo DVR VIP612 Amplifier Control
DISH Solo DVR VIP612 What Is Limited Mode
DISH Solo DVR VIP612 Change Limited Mode