At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Run this paper from the bypass tray located on the right hand side of the machine.
Try setting that paper type on the copier itself.
Load the paper. Go to the manual paper tray select screen. Select tray 1 and then change paper settings.
Glossy paper also tends to slip in these machines when the paper tray rollers are bad.
C 0202 - 1 st tray lift up failured. Remove the 1 st tray,in the right side located 1 screw and in copier is a paper when blocated the tray lift gear.Remove the misfed paper and push in the tray ,open and closed the right door and the copier must be ready. C 0204 - 2nd tray C 0206 - 3 rd tray C 0208 - 4th tray C 0211 - bypass tray Good luck.
You can set the Brother machine to
automatically select the appropriate paper tray based on the paper size
or you can manually select paper tray1 or 2. If you use the Auto Select
feature, the application will automatically pull from the appropriate
tray based on the document#s paper size. For this feature to work, the
tray settings must be definedfrom the machine#s control panel. For
instructions on how to configure this setting, continue to the section
labeled: ADJUSTING YOUR BROTHER MACHINE#S PAPER SIZE SETTING) PART 1: ADJUSTING YOUR BROTHER MACHINE#S PAPER SIZE SETTING 1. On the Brother machine, press MENU. 2. Scroll to and press GENERAL SETUP. 3. Scroll to and press TRAY SETTING.
minumum size for the bypass is 3.5x5.5 and max is 11x17
minimum, for the paper trays is 5.75x8.25 and the max is11.5x16.5
so it should run 5.5x14 in the bypass tray
1 load the paper in the bypass tray
2 in the basics screen touch paper
3 select the button for the bypass tray
4 touch change setting
5 select custom size and program the size
1. Load the envelope paper into the bypass tray.
2. From the Copy Screen on the operation panel, select Paper.
3. Select the bypass tray.
4. Select Change Tray settings.
5. Select Normal for the paper type (do not select Envelope for paper type).
6. Select Custom size.
7. Enter the envelope size.
8. Select OK three times to return to the copy screen.
to set the priority tray for fax reception you have to change software sw in administrator mode:
1 touch the utility/counter button
2 press administrator mode button on the touchscreen
3 enter the passwrod 12345678
4 press the admin. 2 button
5 touch software sw
6 touch mode selection then use the keypad to type 037
7 touch the bit selection button use the arrow keys to select the bit you want to change setting the bit to a 1 enables the tray and 0 disables the trayrefer to the chart below to pick a tray to print faxes from you cannot set all the bits to 0 at least one of them have to set to 1.
bit 7=1 for the 1rst tray
bit 6=1 for the 2nd tray
bit 5=1 for the 3rd tray
bit 4=1 for the 4th tray
bit 2=0 for the bypass
so lets just say you want to put yellow paper in tray 1 to have all the faxes print on yellow paper. you would set bit 7 to a 1 and set bits 6,5,4,2,all to 0
To program a default paper tray to print fax reports, perform the following:
1. Select Utility/Counter.
2. Select User Setting.
3. Select System Setting
4. Select Paper Tray Setting.
5. Select Print Lists
6. Select the paper tray for the fax reports to print from.
7. Press OK.
8. Press Exit on the lower left side of the display to return to the copier screen.
to set the activity report to not print daily
1 touch the utility button
2 touch administrator settings and enter the password 12345678
3 press fax setting
4 press report settings
5 select activity report and change to off
6 press close then exit
×