Software needed need online software for lexmark X4270 series we lost lexmark X4270 software installation to our computer please help

Please visit the Lexmark website to download and install the Lexmark X4270 Printer Driver on your computer. Select your operating system > click on "FILTER" > click on the driver under Recommended Downloads > download and execute the file. Simply follow the instructions on your computer screen to complete the installation.

I have a very good guide on this, it will take a moment to post it for you in pictures, please hold on for 5 minutes.

Please visit the Lexmark website to download and install the Lexmark X4270 printer driver on your computer. Select your operating system > click on "FILTER" > click on the driver under Recommended Downloads > download and execute the file. Simply follow the instructions on your computer screen to complete the installation.
l hope this helps.

Try to fix the 1200 error first. The error indicates that the cartridge carrier has stalled. Please refer to this article to fix the problem: 1200 Error Message on a Lexmark X4250/X4270/F4270 All-In-One. Once your cartridge carrier is functioning properl, re-insert your cartridges - How to Install Ink Cartridges In Lexmark X4200 Series AIO.

You can download the Lexmark X4270 driver by visiting the Lexmark website at http://bit.ly/gKXn7F. Select your operating system, download and execute the file. Follow the instructions on your computer screen.

For your scanning concern, especially when scanning documents, you will need the Lexmark OCR scan software to do the job. The scan software is available only on the installation disc that came with your printer. If you lost the disc, please contact Lexmark Technical Support Center for additional assistance.

Uninstall the existing Lexmark X4270 printer driver from your Windows 7 by going the Start menu ? Programs ? Lexmark 4200 Series ? Tools ? Uninstall. Reboot pc when prompted. When pc turns on, check if your Windows 7 is running on 32-bit or 64-bit operating system by going to the Start menu ? right-click on Computer ? click on Properties. Take note of the system type.
Download and install the X4270 driver for Windows 7 using the links below:

• Lexmark X4270 driver for Windows 7 32-bit
• Lexmark X4270 driver for Windows 7 64-bit

Follow the instructions in the software.
Thanks.

Perhaps the User's Guide can help you out. Just click on this link: http://www.lexmark.com/publications/pdfs/2007/4200/ug/en/frameset.html. Make sure the scan software is already installed in the computer. The scan software can only be installed using the installation cd that came with the printer. If you don't have it or you lost it, I suggest you contact Lexmark Technical Support for the installation cd request. Hope this helps. If you need more assistance, leave a comment and I'll get back to it. Thanks.

Are you getting any particular error messages on the computer when installing the software? If none, uninstall any existing Lexmark software in the computer properly by clicking on the Windows logo Start menu > Programs > Lexmark Series folder > Tools > Uninstall. Reboot pc. To reinstall, I advise you to use the updated version of the software w/c is available for download in the Lexmark website. Before downloading, check if your Vista is running on 32-bit or 64-bit operating system by clicking on the Windows logo Start menu> right click on Computer > Properties. To download, click on the operating system of your computer below:
- Windows Vista (32-bit)
- Microsoft Vista x64 (64-bit)
Install the software. Hope this helps. If you need more assistance, leave a comment. I'll get right back to it.

The aioc.exe may be corrupted and needs to be repaired or reinstalled. You will need the installation cd to repair the software. Just insert the cd in the computer to repair it. You can also use the software online. Just click on this link: http://bit.ly/a2Odsv . Download and install the software. If that won't resolve it, you might need to uninstall everything by going to Start Menu > All Programs/Programs> Lexmark Series folder> Tools> Uninstall. Restart pc. Reinstall the software.

http://downloads.lexmark.com/cgi-perl/downloads.cgi?lxkprod=Lexmark+X4270

Just click on which version of Windows you are running and then download.
Good Luck.

http://downloads.lexmark.com/cgi-perl/downloads.cgi?ccs=229:1:0:439:0:0

and select the OS of your choice.