Question about Pride Jazzy Select 6 Indoor Power Wheelchair

2 Answers

Our Jazzy Select G.T. power wheel chair won't run. The lights keep blinking when the power is turned on but won't run..? Why? Battery is charged.

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Contributor
  • 50 Answers

Hi
delobner,

Sometime we lock our vsi joystick by mistake. Here are the instructions on how to lock and unlock your joystick.

If the problem is still there after write me back and I'll help you.

LOCKING/UNLOCKING THE VSI

The VSI has a feature that enables you to lock your power chair to prevent

unauthorized use.

To lock the VSI:

1. With the VSI powered on, press and hold the on/off key. After one (1)

second, the VSI should beep.

2. Release the on/off key.

3. Push the joystick to the full forward position until the VSI beeps.

4. Pull the joystick to the full rearward position until the VSI beeps.

5. Release the joystick. There should be a long beep.

6. The VSI is now locked.

To unlock the VSI:

1. Press the on/off key and power on the VSI. The maximum speed/profile
indicator should ripple side to side.

Good Luck
mi mobility

Posted on May 05, 2011

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Filmmaker:

    Uploaded 5 video answers.

  • Expert
  • 168 Answers

One of the most common controllers, codes to help you and others.
VSI & VR2 Joystick error flash codes:

  • 1 RED BAR: Low Battery Voltage The battery is flat (more likely).
  • Or the battery has a bad connection (which is unlikely)
  • 2 RED BARS: Left Motor Disconnected The left motor is disconnected. Check all the connections for physical disconnection or corrosion or burning usually caused by the salt poured onto the roads every winter.
  • 3 RED BARS: Left Motor Wiring Trip The left motors wiring has a short circuit. Check all connections and leads for wear and chafing between the left motor and the battery cables or chassis
  • 4 BARS: Right Motor Disconnected The right motor is disconnected. Check all the connections for physical disconnection or corrosion or burning usually caused by the salt poured onto the roads every winter.
  • 5 BARS: Right Motor Wiring Trip The right motors wiring has a short circuit. Check all connections and leads for wear and chafing between the right motor and the battery cables or chassis
  • 6 BARS: Activated if you turn on your wheelchair with an external device like the Charger still connected. 7 BARS: Possible Joystick Trip, Make sure that the joystick is in the centre position before switching on. If you still get this when switching on then joystick is probably faulty.
  • 8 BARS: A control system trip. Make sure that all connections are secure and if so the power module or control pod is probably faulty. Test by substitution of known good one.
  • 9 BARS: The parking brakes have a bad connection or have a failed solenoid, or any lever or switches that disconnect drive for pushing the chair manually may be pulled or switched.
  • 10 BARS: Over voltage detected. This can happen with a bad battery connection although unlikely. More likely your battery charger is faulty and is overcharging your batteries quite severely.
  • 1 BAR to 10 BARS and back in a "ripple" every few seconds. Joystick not cantered when turned on. Switch off and try again.
  • 1 BAR to 6 FLASH every few seconds. System Asleep. Switch off and back on. Time before sleep can be adjusted or disabled in programming

Check out this very informative site (were the above came from)

Hope this helps, If so please click the "Yes" button

Regards, Mark.

Posted on Sep 01, 2014

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My chair is blinking 4 times and I do not have a manual


If it is a Pride Jazzy or similar, the Diagnostic Flash Codes are in this PDF file.

PDF]INFINFB2048_Jazzy_Select_14_Troubleshooting ... - Pride Mobility www.pridemobility.com/download.php?f=troubleshooting/INFINFB2048_Jazzy...
  1. Cached
  2. Similar
basic troubleshooting instructions for the Jazzy Select 14/14XL power chairs. ... on my Jazzy Select 14/14XL seem to be "dead" (controller does not light up when .... What if the left red battery condition meter LED on the VR2 or VSI is flashing? chair is blinking 4 times Google Search

Nov 15, 2016 | Health & Beauty

1 Answer

How to stop squeaky wheels


My tires squeak how can i fix the problem and what ... - Fixya

www.fixya.com > ... > Pride > Jazzy Select 6 Indoor Power Wheelchair
Apr 14, 2012 - my tires squeak how can i fix the problem and what can i use - PrideJazzy ... Question about Pride Jazzy Select 6 Indoor Power Wheelchair ... I have a mpv 5 hoveround wheel chair and I now have a flat on the front left tire.

[PDF]Jazzy Select Series Owners Manual - Pride Mobility Products

www.pridemobility.com/...jazzy/us_select_series_om.pdf

Pride MobilityJazzy Select 6 with Power Seat. JAZZY. SELECT SERIES. Including Models: Jazzy Select, Jazzy Select 6, and .... Battery charger for indoor use only. .... Take wide swings with your power chair's front wheels around any tight corners. ... desired, allow it to come to a complete stop by releasing the joystick, then push the ...

[PDF]Jazzy Select Series - Pride Mobility Products


Dec 28, 2015 | Pride Jazzy Select 6 Indoor Power...

1 Answer

What does it mean on 1122 jazzy when the two red lights blink


JAZZY 1122 - Pride Mobility Products

www.pridemobility.com/...manuals/...jazzy/.../au_jazzy_1...
Pride MobilityJAZZY 1122. How a Power Chair Should ... NOTE: This owner's manual is compiled from the latest specifications and product information available at the time of .

Jul 31, 2015 | Pride Mobility Jazzy 1122 Electric...

1 Answer

I jhave a Jazzy Select GT power chair, I put the charger on it when the light shown red and green, when it powers up when charged the both lights will turn green, but now it will do nothing with start


Hi Gloria,
The first thing you need to do is measure the voltage at the charging socket of the Joystick (outside 2 pins). This will determine a lot of things, so I can guide you further.

Nov 21, 2014 | UPG 12V 35AH Jazzy Select GT Power Chair...

1 Answer

My battery charger for my Jazzy 600 does not light up or get warm when I plug it in. The chair has not been used for months.


I tried to charge my jazzy. The charge light (red) remained on for several hours. Finally I moved the wire slightly the charge light turned green than faded to red. What is my problem? Your solution would be greatly appreciated.

Jun 04, 2012 | Pride Jazzy Select 6 Indoor Power...

1 Answer

I have a jazzy and the power meter keeps blinking a steady red light.... And now the chair is moving really slow....


Low batteries Outlaw. If you have charged the batteries and after only a little while you get the blinking red light -----Time for New batteries. Hope this helps you

Nov 10, 2010 | Pride Mobility Products Jazzy Select 14

1 Answer

The chair was outside and got a small amount of rain on it. Now when we turn it on, the lights (that show battery charge) blink fast and it will not move. My dad is grounded until we can figure this out....


Hi. Count how many lights are flashing, it is showing a fault code. Let us know, or contact your local dealer. Check that the free-wheel levers are in the correct place. Good luck. Neil.

May 19, 2010 | Pride Jazzy 1103 Ultra Standard Power...

1 Answer

Chair no longer charges, no flashing or blinking, lights,


The number of lights that are blinking indicate what the problem is. Visit this site to locate the type on controller on your power chair and you will be able to see that the blinking lights mean:
http://www.pgdt.com/scenter/diagnostics/diagvsi.html
Try to reset your manual brake release as this is a common problem.
If you continue to have a problem, contact your manufacturer or dealer for service. If your insurance purchased they power chair for you, they may also cover the cost of repairs.
Good luck!

May 07, 2010 | Pride Jazzy 1103 Ultra Standard Power...

2 Answers

My Jazzy select wheelchair does not run


you move the joystick and can hear something quicking in the motors

May 17, 2009 | Heavyduty Jazzy 1121 Standard & Heavy Duty...

Not finding what you are looking for?
Pride Jazzy Select 6 Indoor Power Wheelchair Logo

5,924 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pride Health & Beauty Experts

Rob Hill
Rob Hill

Level 3 Expert

1367 Answers

Marvin
Marvin

Level 3 Expert

84625 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Are you a Pride Health and Beauty Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...