DOES THE MAYTAG QUIET SERIES 300 WASHER HAVE A RESET SWITCH? IF SO, WHERE IS IT LOCATED?

google Maytag Quiet series 300 Handle and latch
there are several new handles about $30-35.
link to how to replace handle
copy and paste
https://www.youtube.com/watch?v=Tfw0F5XeWHY


..

You can fix it. Your hot and cold water hoses are reversed on the water valve on the washer. Switch them around you should be fine.

You need to replace the lid switch. Here is a link to the part.

replace the door latch and the handle check to see if the console loops that hold the latch are broken if so replace the console

We have a Maytag Bravo Quiet Series 300 washing machine, the door latch is broken. I have the replacement part ( the locking mechanism) but I need can not figure out how to get the top of the washer to flip up to give me access to top front of the machine to remove the old part and replace it with the new.

How do I flip back the top (not the door) of this machine?

John

Hold down the heated-dry button for 3 seconds and the light will clear.

Maytag Atlantis washer goes thruout washing cycle,but dosen't simse or spin....

MY DISHWASHER KEEPS RUNNING, IT IS A WHIRLPOOL GOLD QUIET PARTNER IV

check the float switch on the righthand side on the bottom in the corner it should click and move freely

Maytag Quiet Series 300. The lights flash in sequence starting from the outside traveling inward. The timer counts backwards from 50 to 1. Then the sequence starts over. and continues over and over. I'm able to clear it when the time reaches 1 or 2. It stays off for a while (3-4 hours) then starts over. I can not clear the countdown until it reaches 1 or 2. After I clear it the dishwasher will work, but until then, no way. This happens with the door open or closed.