How to set a date on Citizen Tinanium WR100? How

Go to Citizens website and they have talking setting instructions, just used them for a skyhawk I puchased online, they make it very easy to set a very complicated watch.

1. Pull the crown out to position 2, two clicks.
2. Press and release the lower right button.
3. Rotate the crown to adjust the minute.
4. Press and release the lower right button.
5. Rotate the crown to adjust the hour.
6. Press and release the lower right button.
7. Rotate the crown to adjust the date.
8. Press and release the lower right button.
9. Rotate the crown to adjust the current month and leap year.
10. Push the crown to position 0.

I have a new Citizen watch with World Timer. I want to set the time manually and turn off the world timer. I never want to receive the signal..... The book is no help.

mcdevito75 here, Hello Manual, sounds like you"ve turned your watch off while setting the display. The watch should start up agin by pressing the MODE or SET Button.It:s possible you may have to press both at the same time MODE and SET but try them one ata time first.

you have to perform a reset to zeros and then reset the time. get the manual here
http://www.citizenwatches.com.au/instruction-manuals
it is C300.

Adjust time date for eco drive wr100

"wr100" stands for water resistant to 100m and is therefore not the model of the watch.

To obtain instructions go to the Citizen web site "citizen.com"

Choose your area from the menu.

On the right you will see options, choose "technical support"

Select "setting instructions"

You will then be asked to enter the calibre number ( see instructions just above the box for information on where to find the number).

You should now be able to read the instructions.

Hi Try www.citizenwatch.com for your manual of instructions.
Try Leaving watch in direct strong sunlight or under bright light for at least 12 hours.

I need an instruction manual for a Citizen Blue Angels Navihawk WR100 watch. Can you provide a free manual?