Do you have a web sight or reciepes for the bread factory plus sanyo smb-20 bread maker extra large size

The star-shaped screws are called TORX and range in size from T-1 [small] to T-50[ quite large]. a set of inexpensive bits that fit a driver handle can be found at a hardware or auto supply.

Here is a direct link to a new paddle for that bread machine currently available on Ebay for about $18 US plus shipping:

http://www.ebay.com/itm/Cooks-Essentials-Breadmaker-Paddle-0-CETTR875-/200588189792?pt=Small_Kitchen_Appliances_US&hash=item2eb3fce060


Just use your mouse to click on the link, which is the underlined and highlighted text just above. This will open a new web browser page automatically for you and allow you to view the information and item at the website indicated.

Please comment back here to this page if you have any details to add, have any questions, have difficulty accessing the link, or just require further general assistance and I will respond as soon as I see it.

I hope that was helpful to you, good luck and take care.

Joe.

Most major manufacturers supply manuals online so if you were to log on to the manufacturer's web site, you may be pleasantly surprised as usually, if available, one is able to download, by model number, Customer Instruction Manuals, Dealer Network for spare part supplies as required.

The information is normally free of charge.

I hope this helps

Most major manufacturers supply manuals online so if you were to log on to the manufacturer's web site, you may be pleasantly surprised as usually, if available, one is able to download, by model number, Customer Instruction Manuals, Dealer Network for spare part supplies as required.

The information is normally free of charge.

I hope this helps.

Here is the point of contact for Pillbury Bread Machines: (parts and service)

Bell Electronics
16918 Gramercy Place
Gardena, CA 90247
(800) 858-3277
(310) 352-4609

I do not think they have manuals:

This site will be helpful to you:
http://www.ehow.com/how_7517176_directions-pillsbury-bread-maker.html

(note the link to the Pillbury recipie site on that page)

Pillsbury contact info: 1-800-775-4777
http://consumercontacts.generalmills.com/ConsolidatedContact.aspx?page=http://www.pillsbury.com/&WT.mc_id=partner_micro_site_acquisition_recipes_pillsbury&ESRC=15660&js=True
(I don't think they have the manual either!)

Here is a source where you can purchase the manual ($9.90 with free shipping):
http://www.ioffer.com/i/pillsbury-1015-bread-maker-machine-manual-recipes-172980207

Thanks for choosing FixYa,
Kelly

thankyou so much now i can use my bread maker .

Try this site for the manuals. You will need a model number for your bread maker.

http://www.devicemanuals.com/guide/Bread%20Machine/West%20Bend-manuals.html

You can download the manual in PDF from the below site.

http://www.devicemanuals.com/guide/Bread%20Machine/West%20Bend/West-Bend-L5225-41063-Instruction-Manual-==TXpVeE9USTA=.html

I found the manual at http://www.retrevo.com/support/Sanyo-SBM-150-manual/id/284ag617/t/2/

Need a Manual for a Balla Cucina Bread Maker model number XBM1018. Where can I get one?
Respond to [email protected] Thanks Joe