I want to set my time date setting so it will be recorded on my pictures. Thank you [email protected]

set time & date.try change memory ic or" repogram for reset the machine.

What is the model of your camcorder?

Try setting the clock on the remote press [FUNCTIONS] go to SETUP menu - locate the CLOCK option (it should be under 'OTHERS' in the setup) and set the current time, press [ENTER/OK] to store if necessary, then press [RETURN] to exit the setup. Once clock is set correctly, future DVD thumbnails will show the actual date/time of recording in this (and similar) model combo units. If auto clock setting is not possible, set it manually as above.

I assume in spite of the wrong date/time, your DVD recordings have been successful. Incorrect clock and date setting usually only affects timer recording for VHS.

If you have lost or misplaced your original owner's manual, you can download a free pdf version (for Region 1 model) from:

http://www2.panasonic.com/consumer-electronics/support/Video/DVD-Recorders-Players/DVD-Recorders/model.DMR-EZ48VK

or, if you live outside USA, download the 'Australia/NZ' pdf version of the manual (for Region 4 model) from:

http://www.panasonic.com.au/Products/DVD+and+Blu-ray/DVD+-+Players+and+Recorders/DMR-EZ48V/Downloads

either one of these will provide you a full copy of the original user guide/setup including clock.

All free. Hope these suggestions help.

Hello and Welcome to FixYa!

To set the date and time stamp on pictures, Follow the given instructions:
Setting Date and Time:

First of all set the exact and time if your camera:

• Press the "Menu" button on the camera and use the right navigation button to choose the "Set Up" menu.
• Scroll down to "Date/Time" and press the ""Func./Set" button. The set date and time will appear on the screen, and the month unit will flash.
• Adjust the month unit by pressing the up or down navigation buttons. Move to the day unit by pressing the right navigation button. Use the same instructions to adjust each unit of the date and time.Push the "Func./Set" button to save the time and date settings.

Setting Date Stamp on pictures:

• Press the "Func./Set" button and select "Recording Pixels" and "Postcard". The camera is now set to "Postcard" mode.
• Open the "Rec." menu by pressing the "Menu" button on the back of the camera.
• Highlight "Date Stamp" by pressing the down navigation button.
• Change the "Date Stamp" setting by pressing the right or left navigation button. Your choices are "Off", "Date" or "Date/Time". Now, when you take photographs the date or the date and time will appear on the picture.

If this solution helps you then your token of appreciation in the form of Rating as Four Thumbs and a testimonial will be esteemed.
Thanks you for using FixYa!

Welcome to FixYa,

You can disabled the Date Imprint. In this option you can print your pictures without the date and time printed on it.

All you have to do is set the Date Imprint on its default setting or setting it on OFF
Just go to Set up Menu and look for the Date Imprint and set it to OFF.

There are other option where the Date Imprint will be disabled.

- When the Continous Mode is set to Continous or BBS
- When the Scene mode is set to Sports, Museum, or Panorama assist.
- When movies are being recorded.

Hope this information will help you and can answered your question.

Thank you for using FixYa.

Timer Recording JVC VCR HR A591U
Timer recording can be programmed on-screen with
the remote control. The built-in timer allows automatic
unattended recording of up to 8 programs within 1
month.

EXAMPLE: Program a timer recording for the 26th day,
channel 125 (CATV), 11:00 - 11:30 PM on timer program
number 1 (Tape speed: EP).

When a TV is connected with an audio/video cable, turn the
TV and this VCR on and select the video input mode on the
TV.


• After timer recording is completed, the VCR turns off
automatically.
• You can program the timer recording while a regular
recording is in progress; the menu screens will not be
recorded.
• The timer recording will start at 20 seconds before the time
you predetermined.

Press MENU on the Remote.
Check the “TIMER REC SET”
option is selected, then press
ENTER.

Press SET –/+ to select one of
the program lines, then press
ENTER.

Press SET –/+ to select the
date, then press ENTER.

Set the start time, end time,
channel and tape speed as in
step 3.
NOTE: To record from external
source, press SET –/+
and set the channel to
"L". "L" will appear next
to CH 125 (or 69).

To enter other programs,
repeat step 2 through 4. Or,
press MENU twice to return
to the normal screen.

Press TIMER on the Remote.
The power will go off, the
TIMER REC indicator ( ) will
light and the VCR stands by
for recording.

To cancel a program:

Press the SET –/+ to select the
“TIMER REC SET” option in the
MENU. Then press SET –/+ to
select the unnecessary program,
and press CANCEL to cancel the
program.

You could try going into the menu and scroll to "reset" and follow the on-screen instructions.

Contact [email protected]. They will be glad to help you.

Goto setting and turn on time and date..

Press and hold folder/menu button until Sense, forward 5x, press play then forward then play.....you can figure it out, right?