Can't find "yes" key on norstar 7208 to reset pwd.

The 7208 does not store messages. Do you have a Norstar Voicemail on the system? If so you need auto attendant or direct-in-dual access to retrieve messages. Or via your telco's voicemail if that's what you use.

Does it ring when you move it to a known ringing port? Is it programmed to ring (Terminals & Sets) Appear and Ring? Do you have Automatic Set Relocation turned on so the extension number stays with the phone?

There are a lot of features to check for ringing, including the volume of the set.

Carl

The following website will help you with the operation and programming of your 7316:

http://www.telephonemagic.com/phone-support/norstar-feature-programming-code.htm

This link will allow you to display and save a copy of the 7208 User Card:

http://telecommunications.tamu.edu/userguides/M7208_16.pdf

Finally this link will take you to a site that will have user cards for the phones as well as manuals for the programming of the Norstar Call Manager User Guide:

http://www.alphatelecom.ca/meridian_norstar_manuals.htm

These steps should allow you to resolve your issue. If you do have further problems please don't hesitate to let us know. Thank you for the opportunity to assist you in resolving your issue.

The time and date comes from the Norstar KSU not from the phone.

The M2008 set (NT9K08AD03) doesn't work on a CICS system. It works with the Meridian PBX systems. The type of sets that work with a Compact ICS system are M 7100, 7208, 7310, 7324 and T 7100, 7208, 7316, 7316e as well as some of thier cordless sets.

Reseting passwords are done on M 7310's, M 7324's or T 7316(e)'s. M 7208 sets can't perform administration tasks.

Voicemail programming can be done from any set providing it s not a 7100 or 7208
press feature 983 the screen should say log:
enter 1020000 (default password) if you have a 3 digit intercom number, 120000 if you have a 2 digit intercom number
the display should say mbox, AA, and othr above the three soft keys
press the mbox soft key
the screen should say add, del, and chng above the soft keys
press the chng soft key
enter in the mailbox number you wish to reset the password on
press ok
the screen should say reset and next above the soft keys
press the reset soft key
press the Rls key
your password should be reset to 0000

press feature *0. you can now look at any button on your phone to see what it is, touching the intercom button will tell you your extension

Sounds to me your trying to access your speed dial bins feature 0 then your speed dial will get you to the speed dial bins 71-92 this is your personel spedd dials your phone only 0-70 are system wide speed dials . Feature * 4 is not a feature in norstar systems.

Feature 985 press 9 pwd:  73738767793