Can i transfer information from the recorder to my computer? marantz model cdr420.

did you check the belts inside the mechanisum.?

Contact
Marantz
to get original replacements

Have you checked which CDR media the device can use.
This may be as simple as using a CD-R rather than a CD+R or vice versa,
Also check if you may be burning to a CDRW or CDR.

could be bad cd's ,but id say your recorder is going bad. you can try cd rw disks they work better in this case. then use a pc to copy to regular cd then reuse the cd rw disk again.

If you are attempting to burn mp3 files as an audio CD, then that's the problem. You cannot burn audio CDs from MP3 files. You have to burn MP3 files as a data CD and not as an audio CD. See excerpt taken from page 33 in the CDR420 user guide. "Prepares CDs that can be played on standard CD players. Compact Disc Digital Audio (CDDA) uses uncompressed PCM, .wav files. The CDR420 does not convert MP3 files to PCM so MP3 files are ignored if you choose AUDIO as the CD TYPE"

You cannot burn audio CDs from MP3 files. You have to burn MP3 files as a data CD and not as an audio CD. See excerpt taken from page 33 in the CDR420 user guide. "Prepares CDs that can be played on standard CD players. Compact Disc Digital Audio (CDDA) uses uncompressed PCM, .wav files. The CDR420 does not convert MP3 files to PCM so MP3 files are ignored if you choose AUDIO as the CD TYPE"

Hi, i have located the manual for this device. you can access it and, print it out as well if you choose. the link to your manual is below.

CLICK HERE FOR THE CDR420 USER MANUAL

Please rate and god bless:)

try turing off opc in menu see if that helps use hi end meadia only memerex i like

if you already recorded the voices, no ploblem, unplug the power supply will not destroy the recording. and start playbak again.

Simply switch the analog to digital button on the front to analog, turn off the machine and turn it back on.