F20 code - Whirlpool Duet GHW9150P Front Load Washer

Question edited for clarity.

A Miele Washer F20 error code generally means that the drain pump filter is clogged and needs to be cleaned.

Miele Washer F20 - Troubleshooting Guide - HowToFixit.Net

Videos as well

https://www.google.com/search?q=miele+washer+error+code+f20

..

he f20 (or fh) error code on a Whirlpool Front Load Washer is an indication of a water supply issue. To remove the f20 error code from the display panel, press Pause/Cancel 2 times. If that did not clear the error code, see below for what may be wrong

heres a link...https://removeandreplace.com/2016/01/12/whirlpool-washer-error-code-f20-troubleshooting-front-load-washing-machine/

Whirlpool WasherDuet Repair F20 Error Code - YouTube






www.youtube.com/watch?v=kYuRQNbR9Nc

• By Mike Murphy ·



• 110,010 views ·



• Added May 11, 2011

How to Fix A Whirlpool Washer Model:Duet that gives you an F20 Error Code.

How to fix F20 error code whirlpool duet YouTube

https://www.youtube.com/results?search_query=How+to+fix+F20+error+code+whirlpool+duet

Whirlpool error code F20 appears when no water is detected entering the machine or if the pressure switch trip is not detected. The pressure switch is the part of the machine that monitors high water pressure. The washing machine automatically cancels the wash cycle during an F20 error. Wonder if it has additional issue since it won’t stop quality Appliance repair Stuart Internet answer.

Error F20 indicates lack of water entering the machine.

Read more: http://www.ehow.com/search.html?s=+Kenmore+HE2+Plus+Front+Load+Washer++F20+error+code&skin=home&t=all#ixzz2qLeZJpIO

The following provided by fixya has the solution to error F20.

Click here for detailing on F20 Error

Good luck and please do rate my answer.

The following link explains the "F20" error code:

http://www.fixya.com/support/r1491905-f20_error_code_whirlpool_duet_kenmore

I recommend checking your washer installation for a possible siphoning condition and kinked fill hoses, first, as these are the easiest items to rule out.

If you have questions, please let me know. I hope this helps you.

F20 ERROR CODE ON A KENMORE HE2T FRONT LOAD WASHER.THE FIX FOR ME WAS TO REPLACE THE TUBE THAT RUNS FROM THE PRESSURE SWITCH TO THE BOTTOM OF THE WASHER.YOU MUST REMOVE THE TOP AND BACK COVERS OF THE MACHINE(EASY).REPLACED TUBE WITH3/16 INCH CLEAR TUBE.THE ORINGINAL TUBE HAD A PIN HOLE FROM RUBBING AGINST THE SIDE OF THE MACHINE AFTER 5 YEARS OF USE.THIS COST UNDER $10 DOLLARS TO FIX. NO SERVICE GUY=MORE BEER MONEY GOOD LUCK.