Javelin viper 1.5 POS Touch Screen pinout. Does anyone have a pinout diagram (or description) for the 8-pins on the back of a Viper 1.5 touchscreen?

Consider how the switch will be used before choosing a mounting location. Check for rear clearance before drilling a 9/32-inch hole and mounting the switch.The GRAY wire in the two-pin plug may also be used as a (+) ghost switch input and can be connected to any (+) switch in the vehicle. (See Feature Descriptions section of this guide.)

This is from the installation manual for the Viper 300. To answer your question, it is probably camoflaged. They only needed to tie +12vdc to the input line. What does this mean? Well, my best guess is, they are using one of your switches on your dash to act as the Valet function. Look for where the Gray wire, from the wiring harness of the Viper goes to: that WILL BE your hidden Valet switch. Best of luck!

Viper 300 ESP Installation Manual Plug in Harnesses Super Bright Led Valet...

It is basically a PC, if you format it you will lose everything on the harddrive. You then need to install whatever stock management software you want on it.

Here is a copy of the users manual for Hayward Viper pool cleaners. It has pretty detailed descriptions and diagrams. It should help you get your cleaner operating properly.

http://www.haywardflowcontrol.com/pdf/manuals/Manual115.pdf

visit respective brand site

Card readers build up magnrtic particles from the cards they read . u might try cleaning it with a blank card that has a rough surface/ladened with alcohol, or a very small q-tip ladened with alcohol to remove the dirt and magnetic residue. too much built up residue can cause, loss of reading ability, and lost sensitivity between the card and the reader.

i will sell you my javelin pos it's a viper

hi there

click here for details

don't forget to rate it

i have a working javelin viper i will sell

use a usb cd drive and set your computer bios to boot from the cd

The Viper is network-ready with an integrated 10/100BaseT controller. why would you need one?