Hello rqromero2,
I found this on HP's website. I hope it helps
Picture quality problems (such as lines, fuzzy image, or wrong colors)Check the cables and connections:
Press the CH button to display a different channel. Picture quality problems on a single channel or on all channels may be caused by the TV station signal (antenna) or the cable signal source.
For example: if the image quality issues occur while viewing TV, switch the source to a DVD player to see if the image quality problems go away.
If selecting a different input source (using the remote control) causes the problem to go away, troubleshoot the source device causing the problem - adjust aerial antennas, call the cable company for assistance, and .
If a picture quality problem occurs on all sources, the TV or its settings may be the cause of the problem. NOTE: Higher resolution TVs will make it much easier to view signal problems coming from source signals - especially TV signals. For example, if your TV cable company experiences heavy load on their system, you may be able to detect small miscolored squares that briefly scatter across the screen (macro-blocking). On a smaller standard TV, this type of quality problem is much less noticeable on a standard TV, but can become very annoying when viewed with greater detail.
Press the Menu button to open the OSD. Select the Picture menu and adjust the image as needed.
If you cannot adjust the TV to fix the problem, reset the settings from the OSD to see if the problem goes away.
If this dosent solve your problem, letus know and we will find another solution,
Dahaka
188 views
Usually answered in minutes!
No it was not helpful, I tried hdmi, componont, & rca cable and I still have the problem. Any other ideas or should I call a t.v. repair person?
×