At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Re: 1999 Mpv hold light flashing and speedometer stop...
Hello your speed sensor is malfunctioning this is connected to your speedometer.this is usually located on the top of your transmission 10mm 0r 3/8 bolt single plug this will restore your vehicle speedometer.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
There is a speed sensor for the transmission inside the speedometer gauge. if the speedometer cable is broken the hold light will blink. indicating a trans malfunction code and the transmission will not work properly. do not drive too long without a speedometer cable.
does the check engine light come when this happens some vehicles when the speedometer stops working then the check light comes on does the engine change in the way it runs either at cruise or accelerating then this indicates a speed sensor in the transmission has an intermintant problem if there is no check engine light or change in the way the car runs then it is possible the problem is in the speedometer head or connections at the instrument cluster for the speedometer if the light is on then you need to have the computer checked to see if a code is set for the sensor,if so then that is probably were the problem is keep in mind it can also be a poor connection at the sensor,if this not were the problem is then it probably is in the cluster for the speedometer head or the speedometer head itself
someone has broke or disconnected a wire somewhere under the car whilst changing the starter motor ,but what or where i couldnt tell you without having car on the ramp sorry
Its most likely the vehicle speed sensor. Its on the transmission near the output shaft on the passenger side. Check the connection first, if it's good, change the sensor.
Does your speedometer work ok? There is a sensor on top of your rear differential that provides a signal to both the abs and the computer(speedometer uses the signal from the computer) This sensor goes out pretty common.
Its a faulty sensor switch on your brakes master cylinder. It leaks brake fluid into the wires that are plugged into it and causes a short in the circuit, resulting in a blown fuse that controls the AC, odometer, speedometer, cruise control, and ABS light to come on. This problem can also cause a fire. The fire can occur even when the vehicle is off. To fix this problem go to this URL - http://www.fordwindstarrecall.info/
×