Blurred pictures when scanned - Konica Minolta PRINTING - Bizhub-250 Minolta 25ppm Printer/Copier/Scanner/Fa

try cleaning the glass as if this has greasy smears over it then the pictures not going to come out well next how good is your scanner because if your using a small picture and then using a low DPI scanner then you wont achieve great quality

Does the printer scan OK?

Is the platen glass clean?

That would depend on why the pictures are blurry.

If the pictures are blurred because of camera motion, you need to either use a faster shutter speed or place the camera on a tripod or other stable support.

If the pictures are blurred because the subject is moving, you need to use a faster shutter speed.

If the pictures are blurred because it's out of focus, you need to ensure that the camera is focusing on what you consider to be the subject, not what the camera chooses.

You must take pictures gently. Blur picture may occur if you move during capturing a picture. Or your hand move too fast after taking a picture. Try to stay still for two or three second after push the capture button.
Blur picture when shooting outdoor can be caused by too much light. Don't forget to set your camera in outdoor or panorama mode, and turn of the flash light if you think its too bright.

Hope this help and RATE please !

If it's only 3 weeks old, take it back to where you bought it, and get it fixed or replaced.

problem for hotmail

Bought another Television !

continuous blurred images? or only occasionally (say in low light)?

driver

try putting on the flash because whenever my flash is off the pictures are all blurred and with the flash it is clear! hope it works!!!