At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
RE: DT 10969 Bella vista 5 purchased 2009. I just bought house with this tub in Master bath. The LED control panel blinks 2 out of 4 dots on the bubles control. Also it sounds like a motor is cycling on and off continuously. Any help?
Re: RE: DT 10969 Bella vista 5 purchased 2009. I just...
It sounds as if the relay is not latching on the circuit board for that tub. You probably want to have a Jacuzzi service tech come and take a look at it.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
While the brand of the tub may be of importance to you it may not be important when finding parts for it.
Bath tub manufacturers do not make anything that goes into their tubs i,e. the jets, pumps and controls are all purchased from various Mfg.
Are you have any particular problems with either unit that would make you need the brand of either?
Bath Panels can be very difficult to locate. I would check with your local Jacuzzi Showroom first.
If they are unable to locate the panels you need or they are no longer made then you should head over to Lowes or Home Depot to get a generic panel from one of them and you may need both panels replaced so they match.
When the Plasma TV is plugged in, there're a fewindications of normal operation. Knowing this will help usunderstand what's going on with the unit when anabnormality occurs.1.There is a click from the relaysRL402andRL403when they are activated.2.The LED in the Optical Jack inside the DT board turns on for approx. 4seconds.3.Immediately after that, one of the Tuner LEDs (Right) turns on(Solid Red)for approximately 20 seconds.4.The LED in the Optical Jack inside the DT board turns on again for approx.1 second and both LEDs (tuner and optical jack) turn off.5.Then you will hear another click from the relaysRL402andRL403indicating that they are no-longer engaged. (Note: At this time the Tunerand the Optical Jack LED turn off.)5
There is something in the line or in the faucet.Are your pipes going to the faucet black iron or galvinze.Some of the pipe will rust up and stop a full flow of water.But I would check the faucet first to see if the screw is loose or somethng in it.
i have seen this in the past, a ground fault electrical outlet on the inside of a roman tub,if you have a 2 story house look for access panel on or by tub. otherwise you have to remove tile or other to access motor, you probably need a step too anyways
is there a logo on the tub? Some Mfg use the logo as a touch pad. You should try this. Fill the tub with water, get in it and touch the logo. It should turn on.
×