Hi how can I find out my internal extension number? I've a nortel (BT) instrument.

When you call an internal extension and the extension is either busy or ringing, you can invoke the Ring Again (Call Back) feature. If Ring Again is activated when the dialed extension is ringing, you will be notified when there is activity on the phone and the phone becomes idle. You cannot use this feature on outside lines, and while your phone is idle.

Hi Admin,

This will come up when you have the call log feature on, and if someone calls you internally.. It's a real nuisance. You can dial Feature 812 to view the missed calls, or click the "Calls" button.

Hi Amy, you can change the name for an extension, but it will change the name for the extension for all the phones.

It is best to do programming on a T7316, M7310, or an M7324

1. Feature **23646
2. Password: 266344
>>>your password may have been changed by your phone company. contact them for the password.
3. Scroll to General Admin
4. Go to Names
5. Select Set Names
6. Enter in the DN of the extension you would like to change
7. Use the dial pad to change the extension.
8. Press Rls when finished (handset with arrow facing down)

Just think about it, why would you want to auto dial yourself? You don't need an autodial key for yourself so the system don't allow you to program it.

Hi,

i got this from Nortel expert and it works:

- press feature **266344
- user ID: 738662 Press ok
- Password: 266344 Press ok
Terminal & Extensions will appear
- press Call Timer button 1 time
write your extension or the extension you need to configure
or press find till you find the extension you need
- press Call Timer button 1 time
- press Ring Again button 4 times
Restrictions will appear on the screen
- press Call Timer button 1 time
Restrn Filter will appear
- press Ring Again button 1 times
- press Call Timer button 1 time
Filters will appear
- press Call Timer button 1 time
Normal 02 will appear ( it can be any 2 numbers)
- press CHANGE which appears on the screen
Type 00
and then press the end call button

You can program a memory button with a new number or
feature.


External autodial:

1. Press (Feature), ( * ), (#1).
2. Press a memory button.
3. Dial the external number.
4. Press OK to store the number.
5. Label your new button.


Internal autodial:

1. Press (Feature), ( * ), (#2).
2. Press a memory button.
3. Dial the extension number.
4. Press OK to store the number.


How to erase memory buttons:

1. Press (Feature), ( * ), (#1).
2. Press a memory button.
3. Press OK to erase the button.

Alternatively, you can download the Nortel T7316 Quick Reference Card from IdacomUSA, your solution for Nortel Repair and Refurbishing.

The do not disturb might be active on the extension that your trying to transfer to.On the extension that your trying to transfer to, enter feature #85 to cancel out do not disturb.

You can set divert for the calls to another number. Do check for the call settings and activate the divert based on situation like.. When busy. Not reachable.

Incoming line ring settings are in the config menu under:
2nd option - Line access
enter extension number
2nd option - Ringing
Ringing then can be toggled on or off for each line assigned to that extension.
Mark

It doesn't exactly work that way, but you can program the extensions back under the buttons. Pick a button that you want to save an extension under and press FEAT *2 the button and dial the 2 or 3 digit extension number. Now the button monitors the status of the extension. It will light whether it's in DND, or busy on an outside or internal call.

Carl