My atomic clock won't show the outside temperature and I can't get it set for regular time, it only shows military time. How do I fix these two problems?

Atomic clock keeps losing outside temperature Google Search ..try this link not sure if it will help you with yours.

That makes scence, you have to have an outside temperature probe. If it is wireless it also needs batteries. Check manual for more details.

Look for a setting to change from 24 hour to 12 hour clock display in your clock menu settings.

If your outside temperature is not showing on your clock, that may mean that the clock and the transmitter have lost their connection. To reconnect them you must first take the batteries out of both of the units for 15 minutes. First put the batteries back into the transmitter, and then the clock. Let them sit side by side inside your home. When both the indoor and outdoor temperatures show on your clock with the same reading, or within two degrees of each other, then you may put your transmitter back outside. Remember to keep the transmitter out of the direct sun in a dry place. Also keep it away from metal, which can affect the readings.

I know this is old, but just press the set button. Don't hold it down, just press it once.

Is it one of these?

http://www.klockit.com/PDFs/lacrossemanuals/WS-8157NU.pdf

http://www.klockit.com/pdfs/87135.pdf

http://www.klockit.com/pdfs/87136.pdf

BTW, 24-hour military time and time zones are independent functions.

Hit the set button until the number 24 shows up instead of the time. Hit the "+" button once, and it will switch from 24-hour to 12-hour display. Hit the set button to cycle through the rest of the settings.

Seems to be a consistent problem with Skyscan. I have the 88800 model and my outdoor transmitter isn't transmitting the temperature either. We've replaced the batteries in both the transmitter and clock and nothing for outdoor temp. It's only been used for 9 months.

For the Sharp SPC374T Atomic Clock - Time Zone setting- Press the 'Time' button once, the time zone will show where 'Day' usually is, use the Up or Down buttong to adjust.

For the outdoor Thermo, credit to my neighbor for this one. Remove battery from main unit, wait 2-3 minutes. Reload batteries. Once you get a reading from the outdoor sensor, hit the reset on the main unit. You will have to reset the time zone as described above, but this worked for me after 10 months of no outside temp showing up!

Good luck,
Doc

Each time you press the set button on the back it selects one of the items that you can set. For example if the "month" is selected by pressing the "set" button then press the "+" key to change it from 1->2->3->4 etc. Each time you press "+" key the month will go up by one. Stop when you reach the correct month. You can do the same for each item including the time zone and daylight savings time and whether you want your temperature to be in Celcius or Farenheit. Hope this helps...

FixerUpper