Canon MP560 has error code 6C10. What di I do?

This video concerns the MP550 but according to the comments, it worked for someone with a MP540.
Canon MP550 Ink Absorber Reset 6C10 Error Code

This error is related to the ink absorber/waste ink tank located internally in the printer. Normally you would have to send your Canon to be serviced to resolve this problem, but there is a video turotial on YouTube that shows how to reset this error: Canon MP550 Ink Absorber Reset (6C10 Error Code) - YouTube

Check this method to reset:
6C10 Error

This WEB site gives a solution to your problem.
http://fix-your-printer.blogspot.com.au/2011/06/how-to-fix-error-6c10-on-canon-printers.html

Hi.I think in that model you need also a service tool to reset the ink absorbers.

Hello and Welcome to FixYa!

Error 6c10 is ink absorber problem.You need to reset Printer Canon ink absorber. For this Follow the steps given below

• Start with printer off
• Press and hold resume Button (triangle in the circle) and click "Power" button. Green led should be on
• While holding the Power button, release the Resume Button.
• Without releasing the Power Button, click "Resume" button for two times and release Both Buttons.
• Click "Resume" for four times then soon click "Power" button, to confirm the selected action (reset counter absorber).
• Turn off the printer and turn on again

Error will be removed
If the problem exist then then go to Canon authorized service facility for repair. You can also get support by Canon by phone, at 1-800-OK-CANON (1-800-652-2666)

I hope this solution helps you.

For further assistance, I am here to help

Concerned:

Angel Bird

Hello.

It's probably a waste absorber issue.

A fix from FixYa Support:

1. Start with printer off
2. Press and hold resume Button (triangle in the circle) and click "Power" button. Green led should be on
3. While holding the Power button, release the Resume Button.
4. Without releasing the Power Button, click "Resume" button for two times and release Both Buttons.
5. Click "Resume" for four times then soon click "Power" button, to confirm the selected action (reset counter absorber).
6. Turn off the printer and turn on again

Hope this helps.

If you have used the printer over 6,500 copies then the ink pads below the cartridges will be full and need replacing all printers will stop and give a warning to this effect it can be reset using a secret menu if you have an LCD control panel use my Brother DCP-340CW solution

http://www.fixya.com/support/r4065602-dcp_340cw_machine_error_46_photo_capture