We installed these units in a school they should support 64 users they will not . is there a setting in the unit to that you can change to get the 64 users?

IVE SEN THIS ISSUE BEFORE

THE FACT THAT YOU CANT CHANGE THE SET COOL POINT ON THE UNIT BELOW 64 IS A SYMPTOM OF A DAMAGED CONTROL BOARD (SENTRY III), NOW THE UNIT CONTINUING TO COOL DOWN BELOW THE SET COOL POINT OF 64 AND GOING ALL THE WAY DOWN TO 55 IS MOST LIKELY THE RELAY.
I HAVE FIXED THIS EXACT SAME ISSUE BY REPLACING THE CONTROL BOARD AND RELAY ON THE UNIT.

Change its setting with default settings, your issue will be resolve automatically.

ir2016 is allready A3 size copier.you can change tray setting.pull out tray from machine and then set A3 paper on it according to paper you must change blue lever position from A4 to A3.then close your tray.now you can work with A3 size paper
for double side copying you must be installed a "duplex unit" which is not come with standard machine.It is an optional unit.after that you can make double sided copying.

Try pressing any of the following key combinations: Alt Gr + q Shift + 2 Alt + 64
-------------------- If it doesn't work, maybe your have to change your settings to United States settings, follow the steps bellow (assuming that you have windows vista)
1) Go to control panel.
2) Click on regional and language option (there will be a pop up).
3) Click on the keyboard and languages tab.
4) Click on the change keyboard button (another pop up will appear).
5) Click on add and add the United States Keyboard.
6) Change the keyboard setting on the upper drop down. menu to United States, and then click ok.
This should solve your problem.
Please leave a comment if your need further assistance.
Regards,

Check your interference eliminator code. From your description one radio has it turned off (zero), while the other radio likely has it set to a number, preventing it from hearing the other radio. Refer to your user guide to find the instructions for turning off the code. (As of this date we have not found an FR60 manual posted online.)
Best regards.

Is it blowing cold air.? Depending on your temp. settings will really control the humidity also . try setting it for 64 and see if that helps

Hello,
Here is what the TI knowledge base says about a calculator failing to turn on

For the TI-Nspire™ Family:

1. Remove thekeypad (for TI-Nspire) or the battery door (for TI-Nspire CAS) andremove at least 1 battery from each column of batteries. After 2-5seconds, reinsert the batteries and turn the unit on. This will causethe unit to reboot the operating system.
2. Remove the keypad(for TI-Nspire) or the battery door (for TI-Nspire CAS) and remove atleast 1 battery from each column of batteries. After 2-5 seconds,reinsert the batteries and LEAVE THE UNIT OFF (do not turn on and thenback off). Hold down [Home] [Enter] [P], and while holdingthese keys, press [On]. The device will boot up as in the previousreset, but will display a menu with the following options. Please tryoptions 1, 2, 3, and 4 in that order. ** The [Home] key is located atthe top right of the TI-Nspire keypad and has a picture of a house onit.

Note: • TI-Nspire family model options 2 and 4 above require that the OS be installed. The reset menu will only display if the unit is off and batteries have been removed/replaced as described above.


1. Cancel - The most non-intrusive reset option; no changes are made, the unit restarts.
2. Delete Operating System – The operating system will be deleted without deleting any documents.
3. Delete Document Folder Contents – This will delete the user’s documents, but will not delete the OS.
4. Complete Format – This will delete the OS and all documents for a total erase of memory.

Hope it helps you solve the problem.

• old school hollywood baseball old school hollywood baseball old school hollywood baseball old school hollywood baseball old school hollywood baseball
  

I just got onto a technician who solved the problem for me. What he had me do was:-

1. Pull dowwn the slider and use a pen to press the ACL button.
   That didn't fix it so...
   
2. Take off the slider (the way you would to change the batteries). There is an ABCD slider switch and mine was set to "C". I moved it back to "A" and now it works! I am not sure how it got to "C" though ???
   

The other thing is I had been messing around with the "Manual/Auto" button under the grill on the wall unit. It was set so that the A/C was off. I'm not sure if that is significant.

Hope that helps.

Cheers,
Garry Rogers (ausgaz)

Try connecting using the different COM port settings (mine was COM 4). The setting can be changed within the software.