I have been assigned an office with an old Meridian NT4X36 telephone. It has not user guide available and I need to know how to transfer calls - there is no transfer button on it. Thank you.

Question edited for clarity and spelling of 'Meridian'.

Page 59 of the Manual refers Volume Bar and Program.

Meridian Digital Telephones User Guide

https://drexel.edu > phoneDocs > 2616FullManual
PDF
Apr 24, 2022 - User Guide. Enterprise Solutions Documentation. Nortel Knowledge Netw ... Selecting a position for your Meridian Digital Telephone .

You need to divert the calls.
Check this user guide

PDF]Telephone Features Programming Guide - Avaya Support

https://downloads.avaya.com/css/P8/documents/100142941 AvayaNORTEL NETWORKS is a trademark of Nortel Networks. ... All other trademarks and registered trademarks are the property of their ... One-line and two-line displays . ...Memory buttons . ... Call anomalies for telephones without line buttons . .... Select how you dial your calls . ... Receive a busy signal on an internal call .

Norstar How to program phone how to program voice mail ...

www.phonserv.com/1_PDF_user_guide_meridian_norstar_phone_syste...

Nortel Networks Meridian Norstar How to program voice mail phone feature codes ...Modular ICS KSU must be programmed with an M7310 or a M7324 telephone. ... Lift handset, press Voice Call key or press the Feature button, then press 66 2. .... At the LOG: prompt, enter your mailbox#(extension #. and your password all ...

[PDF]N QRTEL NORSTAR

this will be difficult to answer as you do not say if you have a "phone system" at your offfice or just plain old telephone service(POTS) at the office. If you have a phone system, you will need to look at a system user guide to find out how to cancell/change call forwarding, and if you have POTS, you can call the local phone company for instructions. If you find out what type you have, repost your question with the make/ model if a phone system and I may be able to assist you if you cannot find a user guide.

First, ascertain that telephone functionalities are attainable with familiarising practicalities. Attempting to make calls makes improvements where user guides only makes an initial recognition to features. User guides has resources where malfunctions are restoreable with references materials from devices features. Requesting user guide from the device manufacturer is attainable to compliment the network telecommunictions experiences. Observe the devices brand models to make requests from the internetwork sites.

It's pretty straightforward. You pick a spare button, dial FEAT 00 press the blank button (with a light) and press FEAT 01. There are considerations that I'll reproduce here.

Do Not Disturb (F01) 8
Use this feature to be able to press a programmed button to prevent incoming calls for the
extension from ringing (lights still flash). When Do Not Disturb is on, outside callers hear ringing
while inside callers hear a busy signal. You should use Do Not Disturb only if someone answers
outside calls for your extension when you do not answer them.
Considerations 8
■ Do Not Disturb is available only on system telephones.
■ Do Not Disturb requires a button with lights. When the Do Not Disturb feature is on, the light
is also on, indicating that the telephone will not ring.
■ Use Do Not Disturb when you do not want the auto attendant or the voice messaging system
to transfer calls to you.
■ Use Do Not Disturb if you are assigned to a Hunt Group and you leave your desk, so calls to
the Hunt Group will skip your extension and ring immediately at the next available extension
in the group.
■ To avoid missing calls when Do Not Disturb is not needed, turn it off.
■ If Do Not Disturb is active at a doorphone alert extension, the person at the doorphone hears
signaling, but the alert extension is not signaled.
■ Unanswered calls that are transferred from an extension with Do Not Disturb active ring at
that extension if they transfer return.
■ Extensions with Do Not Disturb activated do not receive Caller ID information, unless the call
is answered.
■ Users with Automatic VMS Cover Assigned or with VMS Cover turned on can activate Do
Not Disturb to Send All Calls immediately to their voice mailbox.
■ Users with Call Coverage turned on can activate Do Not Disturb to Send All Calls
immediately to the covering extension.
■ You cannot use Call Screening (F25) when Do Not Disturb is turned on.

Carl

You have call forwarding?

two kinds ...

kind one - from your telephone company - press *### or what ever your telephone company uses

kind two from your PBS what ever your PBS system asks for for call forwarding.

This information whould be available from your administrator - if you are the administrator ... call the company that installed your PBS for the number.

you have to assign an ext to the phone.Press Program and extension button to assign it to an extension.
all phones have to have different assigned ext (obviously)...

To cancel stored extension(to change) Press program, press PAGE twice, press mute.


I need the users guide!!! have quite a few install and set up guides - I just need the users guide!!! need to change time and other things!!!

Please help...will trade...

you would need to get into the admin programming to change the name, have your system admin person make the change for you.