I need to change the tax 3 to 23 percent? But its only to some products, departments!?

You set the rate in the tax rate program then you set each department as taxed or no tax. If it is affecting all depts, you need to look up department programming and set tax (usually tax1 to 0 or off) in each dept

Firstly, change the rates for each tax in the tax rate setting tables of your manual. Then you need to turn on tax rate 1 and 2 for departments that need both. This is done in the department programming tables. Tax setting can be quite involved so follow the tables carefully.If you need a programming manual, One of the users has it here:

http://the-checkout-tech.com/manuals/cashregisters/Casio_PCR-T2000_users_and_programming_manual.html

In the department programming section, there should be a setting to turn on each tax (tax1, tax2 etc). Turn on or off the tax that you just set the rate for.

In department programming, there is an option to turn on or off each tax. You need to turn off tax1 and turn on tax2 (if that is the one you have programmed for the rate you need). Just look up the tables for tax rate and department programming in the manual. If you don't have one, C-tech has it listed here:http://the-checkout-tech.com/manuals/cashregisters/Casio_PCR-T280_operating_and_programming_manual.html

Hi. You are working in the wrong area. You need to tell each department not to add TAX2. Go to the department programming, and there should be a setting that says use tax1, use tax 2 etc. Turn off tax2 for any depts that you don't want it added and it will no longer print or calculate tax 2 for that department.

--------------------------------------------------------------------------
For anyone looking for a Casio PCR-T2000 manual, see here:
http://the-checkout-tech.com/manuals/cashregisters/Casio2.php

Here is a link to help you find the manual to help you with that. http://www.sharpusa.com/products/FunctionLanding/0,1050,30,00.html

Choose small business cash registers and look for your model. If you don't find it there, go back to the link and choose commercial cash registers.

Go here, choose your model, and you can download a pdf manual with full instructions.
See also here for further support options, tax tables, etc.

I hope this information allows you to resolve this issue. If you need further assistance, please post back with a comment to this thread.
If I've managed to answer your question or solve a problem, please take just a moment to rate this post....thanks!

Ok. Do you need to change the rate, or the categories (departments) that get taxed? There are various settings. If the machine has never had tax setup before, then tell me how many taxes you use, their rate, and whether you tax all categories of product.

Mark

To change the task number you must press and hold % (rate set) for 3 to 5 seconds, should appear tax XX %, now type your tax number and press % again and AC. To test type "100" press TAX + and the result should be 110, if your tax rate is 10% for example.

Ihad lost the manual and i would like the percent for taxes