I have the Philips 42" model and the LED Light is blinking RED 1 Long Blink followed by 1 Short Blink. Can someone tell me what this means and how difficult is it to correct the problem.
My dad had this happen too. after some research, we found out that there are two capacitors on the power supply board right next to the connector for the main logic board that went bad. you can just pull those out and solder in new ones, and it works like new again! i found a repair kit on ebay for $35 including shipping, and that's all it took!
42 plasma flashing blinking 4 red lights 42PF7321D/37 screen does not come on need help
964 views
Usually answered in minutes!
My 42PF7321D/37 is about 18 months old - picture went out, first the top half, then the bottom half - the LED on the lower left hand side just blinks red. Philips no help - repair man says he's not sure may be a bad logic board or panel - logic board is about $300 plus labor, panel is about $1000. Anyone have any ideas - I can change boards if I knew which one.
I also have the same problem. First I would push the power button and the green LED would come on, but no picture. Shortly after the green led will turn a blinking red. Maybe after a couple hours the tv will decide to pop on. However, every time we turned it off we would know if it would come back on. So we left it on without turning off the power for about 3 days and the tv just shut off. This was two weeks ago and it has not come back on. Just a blinking red led.
×