How to load pictures to the frame - Kodak EasyShare SV811 (8858946) Digital Picture Frame

You must be sure the frame will read the file format of the camera. If not, then load the pictures on your computer, use a file conversion program and use a second SD card to load the pictures on then put it in the frame.

I'd recommend putting the pictures on the memory card and inserting it into the digital frame first, them power it on. It should automatically load that way.

I think if the memory of your frame is almost full, the frame will reject any additional file by showing endless loading. Sometimes helps simple switching off and after a couple minutes switching on your frame.

On one side of the frame there should be memory card slots and a usb slot.
two ways to do it, take the memory card from the camera and put it in the frame.
Or down load the camera to tyour computer and then with a usb cable upload the picture fram with the pictures you want
Or from your computer load a memory card and then stick it in the frame

can't load pictures to my frame .and how do i keep them on the frame

How big our your jpg pic files?
reduce them to 800x600: sh hold about 200+ pics.
also delete the pics that were pre-loaded
fred

Make sure the music is in the correct file format for the frame. Some frames take MP3, others take WMA. If the format that you have is not compatible, you must convert it or the frame will not read it.

I could not load my directly directly from PC. I had to put them on my camera memory card, then insert memory card into frame. worked well but took more time.

Plug the frame into the usb slot on your computer. Open up the folder with your pictures on it. Then open up my computer and look for the drive that is the frame. Drag your pictures right to the frame,s drive.,

I had the same problem. I use kodak easyshare software and load my pics on to that. Then put all the pics you want in the picture tray. Have your frame plugged into the computer with your usb cord. Then go up to File menu and drop down to "copy to". On my computer it is Folder "E" which is the drive the frame is connected to. Then pick from the Resize drop down menu " best for picture frame', then click copy. You will see the program loading all the pics to E drive. When done, unplug usb cord and you will see it loading on your pic frame. As easy as this is to do, I found it frustrating as well, but when it works, it is easy. Hope this helps