Incoming call does not show in caller id window all the time. sometimes it simply says "incoming call" without identifying the caller. other times is works proberly.

Next time you have an incoming call:
-Leave the handset down (do not answer the call).
-Press the 'transfer' button to scroll through the different displays until the caller ID is shown.
-Lift the handset to answer the call.
-The next time you have an incoming call it should show the caller ID.

If you have the Caller iD service on your plan, and your phone is filled with your contacts, then the two work automatically and calls coming in on your list will be displayed as you entered them. Calls without any info will only display the most basic of info they allow like just a name, or just a number. Sometimes neither if they choose to block Caller iD. Caller iD is a cellular service and not a hardware function. Check with your service provider.

You need to have Caller ID from your phone Co. 1st. Then when you get a call the number shows up as the phone rings.The handset also has a button called,CID,which you can press and see the last 100 calls you've recieved:)

Using the Caller ID and Redial Lists
Caller ID (CID) is a service available from your telephone provider that shows the phone number (and sometimes the caller's name) of incoming calls. Contact your telephone provider for more information.
Caller ID list



Redial list



When a call comes in, the phone displays the number and name (if available) of the caller.
The phone saves the information for the last 30 received calls to the

CID list.
When it's in standby, the handset shows how many calls came in since the last time you checked the CID list.


Each handset remembers the last 5 numbers you dialed on it. The redial list is separate for each handset.


- - -

Log into your TalkSwitch Management Software.
Go to Telephone Lines.
Under each incoming line make sure that Caller ID is checked.
Click File> Save
Hopefully this will fix it for you.

go to the settings>phone settings>calleridentity>on

Is caller ID enabled on your line, usually this is an extra provided by the phone company, software won't function without it usually.

Hi! There is a small device available in the market which is a converter. By connecting this between landline and phone, caller ID start display simply.

It cost to me Rs.450/- made by Fintel. Try to get it cheaper at your place.

Try this and the problem is solved.

Nrupesh

call panasonic 1-800-211-7262