WS-300m DOWNLOADING THEN EDITING FILES

Hello,

Yes, the files are likely corrupted. You can try a file recovery program such as PC Inspector Smart Recovery. Search snapfiles.com for a free download.

Call Radio Shack - they know and will have the cable you need.

Send it to Olympus for service,the flash memory may be dead....sorry for the bad news

Sorry the answer is no

are you sure that the ws-300m is not deffective?

Connect the recorder to your mac and empty the trashbin

Suggestion is to format the device to remove all unwanted data permanently.

1 While the recorder is stopped, press the MENU button for 1 second or longer. The menu opens
2 Press the + or – button to chooseSubmenu and then + button to “Format”.
3 Press the OK button. The “Cancel” indicator flashes.
4 Press the + button to choose “Start”.
5 Press the OK button. After the “Data Will Be Cleared” message is on for two seconds, “Cancel” will turn on.
6 Press the + button again to choose “Start”.
7 Press the OK button. Formatting begins and an indicator flashes
on the display.
“Format Done” displays when formatting ends

system error is files missing or corrupted... send to repair

format recorder and it will clear all files including corrupted ones... try to safely remove hardware before actually unplugging the device from computer

you can rewind a tad and listen, but you can't overrecord, because a digital recorder writes audio information into a data file and saves it. you just can play it back again and record a new file. if you want to cut off a part of your recording, you have to edit the file in an audio editor. - as the olympus stores wma-files, you'll have to convert them into wav format first to edit them. i tried the 'switch' software successfully.