Lost instruction manual for uniden crystelle cordless phone and need to know how to programme speed dials

The instructions are on page 20 of the manual at
http://www.uniden.com/content/ebiz/uniden/resources/ownersmanuals/CXAI5198om.pdf

The procedure varies from phone to phone. Since you neglected to specify the model of your Uniden cordless phone I can only suggest you select it from the list beginning here to download a copy of the manual.

Select the model of the phone from the list at
http://www.uniden.com/index/manuals_results.cfm?cat=1

How do I change phone from pulse dialing to tone dial.
Thanks
[email protected]

Go to uniden.com and look in customer service/manuals. They may have it to download. You'll need the model #

My Mom had this same problem.   I found these instructions on Uniden's website (uniden.com) under the "Owner Manuel" section.


Here you go - good luck!








Using the Speed Dial Memory 
Storing Numbers in Speed Dial Memory 
Your cordless phone can store up to ten numbers (up to 20 digits each) in the speed dial 
memory. To store number in memory: 
1) When the phone is in standby, press [memory]. The talk/batt low LED flashes. 
2) Use the keypad to enter the phone number. 
 (To enter a 2-second pause between numbers, press [redial/ 
pause]. Each pause counts as a digit. ) 
3) Press [memory] again. 
4) Select the speed dial location where you would like to store the 
number ( [0] to [9] ). You will hear a confirmation tone indicating 
that the number has been stored. 
NOTE: 
• Storing a number to a speed dial location will 
overwrite the any previously stored number without 
warning. 
• When storing numbers into memory and the handset is idle (i.e., no key is 
pressed) for more than 0 seconds, it will beep rapidly, and then the phone 
will return to standby. 
Dialing a Stored Number 
1) When the phone is in standby, press [talk], and listen for a dial tone. 
2) Press [memory] and enter the speed dial entry ([0] – [9]) that has the stored number 
you want to dial. (If you enter a digit that does not contain a stored number, the 
handset will beep rapidly, and the phone will not dial.) 
Chain Dialing 
The speed dial memory is not limited to phone numbers. You can store any number (up 
to 20 digits) that you need to enter once your call connects. This is referred to as Chain 
Dialing. An example is a frequently refilled prescription number. Store your pharmacy 
phone number in one speed dial and your most frequently refilled prescription number 
as another speed dial. To use, once you ring your pharmacy's automated prescription 
line, simply press [memory] and the speed dial number where you stored your account 
number. 
Erasing a Stored Number from Memory 
1) With the phone in standby, press [memory] twice. 
2) Press the number of the speed dial entry. A tone indicates that the stored number is 
erased from memory. 

You should be able to download the appropriate manual from
http://uniden.com/index/manuals_results.cfm

When phone is on standby press memory-the talk led lite should flash. enter the phone # you want to store then push memeory again. Select the speed dial # you'd like to use for this phone # (0-9) then you should here a tone indicating it was successful. Let me know if this works for you-it should!!

Hi

I have a Uniden 2.4GHz Cordless phone.
I need to rececord my greeting on my Answer Machine but have lost my instruction book and dont know which button to press .
Can you help

press and hold the memory key, use the up and down arrow keys to scroll to memory number and press the select key, use the up and down arrow keys to edit or delete entry etc, when finished press the off key to exit.